LSM6DSM Datasheet, PDF (45/113 Pages) STMicroelectronics – always-on 3D accelerometer and 3D gyroscope

LSM6DSM
Application hints
7.2
LSM6DSM electrical connections in Mode 2
Figure 18. LSM6DSM electrical connections in Mode 2
6'26$
06'$
06&/
,17



 1& ^
723
9,(:
1& ^
9GG

 ^0'5'<,17
9''


&
Q)
*1'
&
9GGB,2
Q)
*1'
0RGH
+267
,^&63,Z
/60'60
0DVWHU,^&
/(/6[60W0HUQ''D6O600
VHQVRUV
,^&FRQILJXUDWLRQ
9GGB,2
5_SX
5_SX
6&/
6'$
3XOOXSWREHDGGHG
5_SX N2KP
1. Leave pin electrically unconnected and soldered to PCB.
The device core is supplied through the Vdd line. Power supply decoupling capacitors (C1,
C2 = 100 nF ceramic) should be placed as near as possible to the supply pin of the device
(common design practice).
The functionality of the device and the measured acceleration/angular rate data is
selectable and accessible through the SPI/I²C interface.
The functions, the threshold and the timing of the two interrupt pins for each sensor can be
completely programmed by the user through the SPI/I²C interface.
DocID028165 Rev 2
45/113
113