RX634 Datasheet, PDF (64/106 Pages) Renesas Technology Corp – 54 MHz 32-bit RX MCU with FPU, 90 DMIPS, up to 2-Mbyte flash memory

RX634 Group
5. Electrical Characteristics
Table 5.8 DC Characteristics (7)
Conditions 1: VCC = AVCC0 = VREFH0 = 2.7 to 3.6V, VREFH = 2.7 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Conditions 2: VCC = AVCC0 = VREFH0 = 4.0 to 5.5V, VREFH = 4.0 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Item
Symbol Typ. Max. Unit Test Conditions
Permissible total consumption power*¹
Pd
—
360 mW
Note 1. Total power dissipated by the entire chip (including output currents)
Table 5.9 DC Characteristics (8)
Conditions 1: VCC = AVCC0 = VREFH0 = 2.7 to 3.6 V, VREFH = 2.7 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Conditions 2: VCC = AVCC0 = VREFH0 = 4.0 to 5.5 V, VREFH = 4.0 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Item
Symbol Min. Typ. Max. Unit Test Conditions
Analog power During A/D conversion
supply current
I_AVCC0
—
1.9
4.2
mA Conditions 1
—
2.5
4.2
mA Conditions 2
Waiting for A/D conversion
—
0.1
4
μA
During D/A conversion (per channel)
I_VREFH*¹
—
0.3
1
—
0.46
1
mA Conditions 1
mA Conditions 2
Waiting for A/D, D/A conversion (all units)*²
—
—
23
40
μA
Reference
power supply
current
During A/D conversion
Waiting for A/D conversion
I_VREFH0
—
0.44
1.5
mA Conditions 1
—
0.66
1.5
mA Conditions 2
—
0.1
1
μA
Note: The values for A/D conversion apply when the sample and hold circuit is not in use.
Note 1. The reference power supply current is included in the power supply current value for D/A conversion.
Note 2. The value is the total value of I_AVCC0 and I_VREFH.
Table 5.10 DC Characteristics (9)
Conditions: VCC = AVCC0 = 0 to 5.5 V, VREFH = 0 to AVCC0, VREFH0 = 0 to AVCC0,
VSS = AVSS0 = VREFL = VREFL0 = 0 V, T_a = –40 to +85°C
Item
Symbol
Min.
Typ.
Max.
VCC rising gradient
SrVCC
—
—
20
Unit
ms/V
Test Conditions
At cold start
Table 5.11 Permissible Output Currents
Conditions 1: VCC = AVCC0 = VREFH0 = 2.7 to 3.6 V, VREFH = 2.7 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Conditions 2: VCC = AVCC0 = VREFH0 = 4.0 to 5.5 V, VREFH = 4.0 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Item
Symbol Max.
Unit
Permissible output low current (average value per 1 pin)
Permissible output low current (maximum value per 1 pin)
Normal output mode
Normal output mode
I_OL
2.0
mA
4.0
mA
Permissible output low current (total) Total of all output pins
Permissible output high current (average value per 1 pin)
Permissible output high current (maximum value per 1 pin)
Normal output mode
Normal output mode
I_OL
80
mA
I_OH
–2.0
mA
–4.0
mA
Permissible output high current (total) Total of all output pins
I_OH
–80
mA
R01DS0255EJ0100 Rev.1.00
Feb 25, 2015
Page 64 of 106