RX634 Datasheet, PDF (62/106 Pages) Renesas Technology Corp – 54 MHz 32-bit RX MCU with FPU, 90 DMIPS, up to 2-Mbyte flash memory

RX634 Group
5. Electrical Characteristics
Table 5.3 DC Characteristics (2)
Conditions 1: VCC = AVCC0 = VREFH0 = 2.7 to 3.6 V, VREFH = 2.7 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Conditions 2: VCC = AVCC0 = VREFH0 = 4.0 to 5.5 V, VREFH = 4.0 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Item
Symbol Min. Typ. Max.
Test Conditions
Input leakage current RES#, MD input pin, P35/NMI,
EXTAL, port 4
I_in
—
—
1.0
μA V_in = 0 V, VCC
Three-state leakage Ports 12, 13, 16, 17, 20, 21, C0, C1 I_TSI —
current (off-state)
Except for ports 12, 13, 16, 17, 20, 21,
—
C0, C1
—
5.0
μA V_in = 0 V, VCC
—
1.0
Port L5
—
—
1.8
VCC = 0 V, V_in = 3.9 V
Input capacitance
All input pins
C_in
—
—
15
pF V_in = 0 V,
(except for ports 12, 13, 16, 17, 20,
f = 1 MHz,
21, C0, C1)
T_a = 25°C
Ports 12, 13, 16, 17, 20, 21, C0, C1
—
—
30
Table 5.4 DC Characteristics (3)
Conditions 1: VCC = AVCC0 = VREFH0 = 2.7 to 3.6 V, VREFH = 2.7 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Conditions 2: VCC = AVCC0 = VREFH0 = 4.0 to 5.5 V, VREFH = 4.0 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
VCC
2.7 to 3.6V
4.0 to 5.5V
Item
Symbol Min. Max. Min. Max. Unit Test Conditions
Input pull-up MOS All ports
current
(except for ports 03, 05, ports 35 to
P37, port 4, port L5)
I_p
–200 –10 –400 –50
μA V_in = 0 V
Table 5.5 DC Characteristics (4)
Conditions 1: VCC = AVCC0 = VREFH0 = 2.7 to 3.6 V, VREFH = 2.7 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Conditions 2: VCC = AVCC0 = VREFH0 = 4.0 to 5.5V, VREFH = 4.0 V to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T_a = –40 to +85°C
Item
Symbol Typ. Max. Unit Test Conditions
Supply
current*¹
High-speed
operating
mode
Normal
operating mode
No peripheral
operation*²
All peripheral
operation:
Normal*³
ICLK = 54 MHz I_CC
ICLK = 54 MHz
20 — mA ICLK = 54 MHz
PCLKB = 27 MHz
24 —
PCLKD = 54 MHz
FCLK = 27 MHz
BCLK = 54 MHz
All peripheral
ICLK = 54 MHz
operation: Max.*³
— 55
Sleep mode
No peripheral
operation
ICLK = 54 MHz
15.5 —
All peripheral
operation:
Normal
ICLK = 54 MHz
19.5 —
All-module clock stop mode
14 —
Increase during BGO operation*⁴
12 —
Note 1. Supply current values do not include output charge/discharge current from all pins. The values apply when internal pull-up
MOSs are in the off state.
Note 2. Clock supply to the peripheral functions is stopped. This does not include BGO operation.
Note 3. Clocks are supplied to the peripheral functions. This does not include BGO operation.
Note 4. This is the increase if data is programmed to or erasing from the ROM or E2 DataFlash during program execution.
R01DS0255EJ0100 Rev.1.00
Feb 25, 2015
Page 62 of 106