HD6413003RF Datasheet, PDF (345/715 Pages) Renesas Technology Corp – Microcontroller (MCU)

Waveform Output by Compare Match: In ITU channels 0, 1, 3, and 4, compare match A or B
can cause the output at the TIOCA or TIOCB pin to go to 0, go to 1, or toggle. In channel 2 the
output can only go to 0 or go to 1.
• Sample setup procedure for waveform output by compare match
Figure 10-19 shows a sample procedure for setting up waveform output by compare match.
Output setup
Select waveform
output mode
1. Select the compare match output mode (0, 1, or
toggle) in TIOR. When a waveform output mode
is selected, the pin switches from its generic input/
output function to the output compare function
1
(TIOCA or TIOCB). An output compare pin outputs
0 until the first compare match occurs.
Set output timing
2 2. Set a value in GRA or GRB to designate the
compare match timing.
Start counter
3 3. Set the STR bit to 1 in TSTR to start the timer
counter.
Waveform output
Figure 10-19 Setup Procedure for Waveform Output by Compare Match (Example)
• Examples of waveform output
Figure 10-20 shows examples of 0 and 1 output. TCNT operates as a free-running counter, 0
output is selected for compare match A, and 1 output is selected for compare match B. When
the pin is already at the selected output level, the pin level does not change.
327