PIC16LF1824T39A_12 Datasheet, PDF (354/418 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with XLP Technology

PIC16LF1824T39A
31.3 DC Characteristics: PIC16LF1824T39A-I (Power-Down)
PIC16LF1824T39A
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
Param
No.
Device Characteristics
Min.
Typ†
Max.
+85°C
Units
VDD
Conditions
Note
Power-down Base Current (IPD) (Note 2)
D022
— 0.02 1.0
A
— 0.03 1.5
A
1.8 WDT, BOR, FVR, and T1OSC disabled, all
3.0 ^{Peripherals Inactive}
D023
—
0.2
2.0
A
1.8 LPWDT Current (Note 1)
—
0.5
2.0
A
3.0
D023A
—
12
22
A
1.8 FVR current
—
13
24
A
3.0
D024
—
7.0
14
A
3.0 BOR Current (Note 1)
D025
— 0.65 3.5
A
1.8 T1OSC Current (Note 1)
—
2.3
4.0
A
3.0
D026
— 0.03 1.5
A
— 0.04 2.0
A
1.8 A/D Current (Note 1, 3),
3.0 ^{no conversion in progress}
Power-down Base Current (IPD) (Note 2)
D026A*
— 250
—
A
1.8 A/D Current (Note 1, 3),
— 250
—
A
3.0 ^{conversion in progress}
D027
—
2.0
5.0
A
1.8 Cap Sense, Low Power, CPSRM = 0,
—
4.0
7.0
A
3.0 ^{CPSRNG = 01 (Note 1)}
D027A
—
5.0
8.0
A
1.8 Cap Sense, Medium Power, CPSRM = 0,
—
8.0
13
A
3.0 ^{CPSRNG = 10 (Note 1)}
D027B
—
13
22
A
1.8 Cap Sense, High Power, CPSRM = 0,
—
35
45
A
3.0 ^{CPSRNG = 11 (Note 1)}
D028
—
7.3
16
A
1.8 Comparator Current, Low-Power mode
—
7.4
18
A
3.0 ^{(Note 1)}
D028B
—
28
46
A
1.8 Comparator Current, High-Power mode
—
29
48
A
3.0 ^{(Note 1)}
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.
3: A/D oscillator source is FRC.
DS41657A-page 354
Preliminary
 2012 Microchip Technology Inc.