PIC16LF1824T39A_12 Datasheet, PDF (351/418 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with XLP Technology

PIC16LF1824T39A
31.1 DC Characteristics: PIC16LF1824T39A-I (Industrial)
PIC16LF1824T39A
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C  TA  +85°C for industrial
Param.
No.
Sym.
Characteristic
Min. Typ† Max. Units
Conditions
D001 VDD
Supply Voltage (VDDMIN, VDDMAX)
PIC16LF1824T39A 1.8 — 3.6
2.5 — 3.6
V FOSC  16 MHz:
V FOSC  32 MHz (Note 2)
D002* VDR
RAM Data Retention Voltage (Note 1)
PIC16LF1824T39A 1.5
—
—
V Device in Sleep mode
D002A* VPOR
Power-on Reset Release Voltage
— 1.6 —
V
D002B* VPORR Power-on Reset Rearm Voltage
PIC16LF1824T39A — 0.8 —
V Device in Sleep mode
D003 VADFVR Fixed Voltage Reference Voltage for -8
—
6
ADC
% 1.024V, VDD  2.5V
2.048V, VDD  2.5V
D003A VCDAFVR Fixed Voltage Reference Voltage for -11 —
7
Comparator and DAC
% 1.024V, VDD  2.5V
2.048V, VDD  2.5V
D004* SVDD
VDD Rise Rate to ensure internal
Power-on Reset signal
0.05 —
— V/ms See Section 7.1 “Power-on Reset
(POR)” for details.
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data.
2: PLL required for 32 MHz operation.
 2012 Microchip Technology Inc.
Preliminary
DS41657A-page 351