PIC16LF1824T39A_12 Datasheet, PDF (173/418 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with XLP Technology

PIC16LF1824T39A
20.2 Option and Timer0 Control Registers
REGISTER 20-1: OPTION_REG: OPTION REGISTER
R/W-1/1
WPUEN
bit 7
R/W-1/1
INTEDG
R/W-1/1
TMR0CS
R/W-1/1
TMR0SE
R/W-1/1
PSA
R/W-1/1
R/W-1/1
PS<2:0>
R/W-1/1
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-0
WPUEN: Weak Pull-up Enable bit
1 = All weak pull-ups are disabled (except MCLR, if it is enabled)
0 = Weak pull-ups are enabled by individual WPUx latch values
INTEDG: Interrupt Edge Select bit
1 = Interrupt on rising edge of INT pin
0 = Interrupt on falling edge of INT pin
TMR0CS: Timer0 Clock Source Select bit
1 = Transition on T0CKI pin
0 = Internal instruction cycle clock (FOSC/4)
TMR0SE: Timer0 Source Edge Select bit
1 = Increment on high-to-low transition on T0CKI pin
0 = Increment on low-to-high transition on T0CKI pin
PSA: Prescaler Assignment bit
1 = Prescaler is not assigned to the Timer0 module
0 = Prescaler is assigned to the Timer0 module
PS<2:0>: Prescaler Rate Select bits
Bit Value Timer0 Rate
000
1:2
001
1:4
010
1:8
011
1 : 16
100
1 : 32
101
1 : 64
110
1 : 128
111
1 : 256
 2012 Microchip Technology Inc.
Preliminary
DS41657A-page 173