PIC16LF1824T39A_12 Datasheet, PDF (127/418 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with XLP Technology

PIC16LF1824T39A
REGISTER 12-11: LATC: PORTC DATA LATCH REGISTER
U-0
—
bit 7
U-0
R/W-x/u
R/W-x/u R/W-x/u
—
LATC5
LATC4
LATC3
R/W-x/u
LATC2
R/W-x/u
LATC1
R/W-x/u
LATC0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-6
bit 5-0
Unimplemented: Read as ‘0’
LATC<5:0>: PORTC Output Latch Value bits⁽¹⁾
Note 1: Writes to PORTC are actually written to corresponding LATC register. Reads from PORTC register is
return of actual I/O pin values.
REGISTER 12-12: ANSELC: PORTC ANALOG SELECT REGISTER
U-0
—
bit 7
U-0
U-0
U-0
R/W-1/1
R/W-1/1
—
—
—
ANSC3
ANSC2
R/W-1/1
ANSC1
R/W-1/1
ANSC0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-4
bit 3-0
Unimplemented: Read as ‘0’
ANSC<3:0>: Analog Select between Analog or Digital Function on pins RC<3:0>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input⁽¹⁾. Digital input buffer disabled.
Note 1: When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
 2012 Microchip Technology Inc.
Preliminary
DS41657A-page 127