PIC16LF1824T39A_12 Datasheet, PDF (11/418 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with XLP Technology

PIC16LF1824T39A
TABLE 1-2: PIC16LF1824T39A PINOUT DESCRIPTION (CONTINUED)
Name
Function
Input Output
Type Type
Description
RC3/AN7/CPS7/C12IN3-/
P2A^(1,2)/CCP2^(1,2)/P1C^(1,2)/
SS^(1,2)/MDMIN
RC3
AN7
CPS7
TTL CMOS General purpose I/O.
AN
— A/D Channel 7 input.
AN
— Capacitive sensing input 7.
C12IN3- AN
— Comparator C1 or C2 negative input.
P2A
— CMOS PWM output.
CCP2
ST CMOS Capture/Compare/PWM2.
P1C
— CMOS PWM output.
SS
ST
— Slave Select input.
RC4/C2OUT/SRNQ/P1B/TX^(1,2)/
CK^(1,2)/MDOUT
MDMIN
RC4
C2OUT
ST
— Modulator source input.
TTL CMOS General purpose I/O.
— CMOS Comparator C2 output.
SRNQ
— CMOS SR latch inverting output.
P1B
— CMOS PWM output.
TX
— CMOS USART asynchronous transmit.
CK
ST CMOS USART synchronous clock.
RC5/P1A/CCP1/RX^(1,2)/DT^(1,2)/
MDCIN2
MDOUT
RC5
P1A
— CMOS Modulator output.
TTL CMOS General purpose I/O.
— CMOS PWM output.
CCP1
ST CMOS Capture/Compare/PWM1.
RX
ST
— USART asynchronous input.
DT
ST CMOS USART synchronous data.
MDCIN2 ST
— Modulator Carrier Input 2.
VDD
VDD Power — Positive supply.
VSS
VSS Power — Ground reference.
VDDRF
VDDRF Power — Positive supply.
VSSRF
VSSRF Power — Ground reference.
CTRL
CTRL CMOS — Configuration Selection and Configuration Clock
RFOUT
RFOUT
—
RF Transmitter RF output
DATA
DATA CMOS CMOS Configuration Data and Transmit Data
XTAL
XTAL XTAL — Crystal Oscillator
Legend: AN = Analog input or output CMOS = CMOS compatible input or output
OD = Open Drain
TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels I²C™ = Schmitt Trigger input with I²C
HV = High Voltage
XTAL = Crystal
levels
Note 1: Pin functions can be moved using the APFCONO and APFCON1 registers (Register 12-1 and Register 12-2).
2: Default function location.
 2012 Microchip Technology Inc.
Preliminary
DS41657A-page 11