PIC16LF1824T39A_12 Datasheet, PDF (125/418 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with XLP Technology

12.3.3 PORTC FUNCTIONS AND OUTPUT
PRIORITIES
Each PORTC pin is multiplexed with other functions. The
pins, their combined functions and their output priorities
are briefly described here. For additional information,
refer to the appropriate section in this data sheet.
When multiple outputs are enabled, the actual pin
control goes to the peripheral with the lowest number in
the following lists.
Analog input and some digital input functions are not
included in the list below. These input functions can
remain active when the pin is configured as an output.
Certain digital input functions override other port
functions and are included in the priority list.
RC0
1. SCL (MSSP)
2. SCK (MSSP)
3. P1D
RC1
1. SDA (MSSP)
2. P1C
3. CCP4
RC2
1. SDO (MSSP)
2. P1D
3. P2B
RC3
1. SS (MSSP)
2. CCP2
3. P1C
4. P2A
RC4
1. MDOUT
2. SRNQ
3. C2OUT
4. TX/CK
5. P1B
RC5
1. RX/DT
2. CCP1/P1A
PIC16LF1824T39A
 2012 Microchip Technology Inc.
Preliminary
DS41657A-page 125