PIC18F2331_10 Datasheet, PDF (340/392 Pages) Microchip Technology – 28/40/44-Pin Enhanced Flash Microcontrollers with nanoWatt Technology, High-Performance PWM and A/D

PIC18F2331/2431/4331/4431
26.3 DC Characteristics: PIC18F2331/2431/4331/4431 (Industrial, Extended)
PIC18LF2331/2431/4331/4431 (Industrial) (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA  +85°C for industrial
-40°C TA  +125°C for extended
Param
No.
Symbol
Characteristic
Min
Max Units
Conditions
VOL
D080
D083
VOH
D090
D092
Output Low Voltage
I/O Ports
OSC2/CLKO
(RC, RCIO, EC, ECIO modes)
Output High Voltage⁽³⁾
I/O Ports
OSC2/CLKO
(RC, RCIO, EC, ECIO modes)
—
—
VDD – 0.7
VDD – 0.7
0.6
V IOL = 8.5 mA, VDD = 4.5V,
-40C to +85C
0.6
V IOL = 1.6 mA, VDD = 4.5V,
-40C to +85C
—
V IOH = -3.0 mA, VDD = 4.5V,
-40C to +85C
—
V IOH = -1.3 mA, VDD = 4.5V,
-40C to +85C
Capacitive Loading Specs
on Output Pins
D100 COSC2 OSC2 Pin
—
15
pF In XT, HS and LP modes
when external clock is
used to drive OSC1
D101 CIO
D102 CB
All I/O Pins and OSC2
(in RC mode)
SCL, SDA
—
50
pF To meet the AC Timing
Specifications
—
400
pF I²C™ Specification
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PIC^® device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
DS39616D-page 340
 2010 Microchip Technology Inc.