PIC18F2331_10 Datasheet, PDF (111/392 Pages) Microchip Technology – 28/40/44-Pin Enhanced Flash Microcontrollers with nanoWatt Technology, High-Performance PWM and A/D

PIC18F2331/2431/4331/4431
10.5 RCON Register
The RCON register contains bits used to determine the
cause of the last Reset or wake-up from a power-
managed mode. RCON also contains the bit that
enables interrupt priorities (IPEN).
REGISTER 10-13: RCON: RESET CONTROL REGISTER
R/W-0
U-0
IPEN
—
bit 7
U-0
R/W-1
R-1
—
RI
TO
R-1
R/W-0
R/W-0
PD
POR
BOR
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7
bit 6-5
bit 4
bit 3
bit 2
bit 1
bit 0
IPEN: Interrupt Priority Enable bit
1 = Enable priority levels on interrupts
0 = Disable priority levels on interrupts (PIC16CXXX Compatibility mode)
Unimplemented: Read as ‘0’
RI: RESET Instruction Flag bit
For details of bit operation, see Register 5-1.
TO: Watchdog Timer Time-out Flag bit
For details of bit operation, see Register 5-1.
PD: Power-Down Detection Flag bit
For details of bit operation, see Register 5-1.
POR: Power-on Reset Status bit
For details of bit operation, see Register 5-1.
BOR: Brown-out Reset Status bit
For details of bit operation, see Register 5-1.
 2010 Microchip Technology Inc.
DS39616D-page 111