PIC18F2331_10 Datasheet, PDF (167/392 Pages) Microchip Technology – 28/40/44-Pin Enhanced Flash Microcontrollers with nanoWatt Technology, High-Performance PWM and A/D

PIC18F2331/2431/4331/4431
17.2.6 VELOCITY MEASUREMENT
The velocity pulse generator, in conjunction with the
IC1 and the synchronous TMR5 (in synchronous
operation), provides a method for high accuracy speed
measurements at both low and high mechanical motor
speeds. The Velocity mode is enabled when the VELM
bit is cleared (= 0) and QEI is set to one of its operating
modes (see Table 17-6).
To optimize register space, the Input Capture
Channel 1 (IC1) is used to capture TMR5 counter
values. Input Capture Buffer register, CAP1BUF, is
redefined in Velocity Measurement mode, VELM = 0,
as the Velocity Register Buffer (VELRH, VELRL).
TABLE 17-6: VELOCITY PULSES
QEIM<2:0>
Velocity Event Mode
001
x2 Velocity Event mode. The velocity
010
pulse is generated on every QEA edge.
101
x4 Velocity Event mode. The velocity
110
pulse is generated on every QEA and
QEB active edge.
17.2.6.1 Velocity Event Timing
The event pulses are reduced by a fixed ratio by the
velocity pulse divider. The divider is useful for
high-speed measurements where the velocity events
happen frequently. By producing a single output pulse
for a given number of input event pulses, the counter
can track larger pulse counts (i.e., distance travelled)
for a given time interval. Time is measured by utilizing
the TMR5 time base.
Each velocity pulse serves as a capture pulse. With the
TMR5 in Synchronous Timer mode, the value of TMR5
is captured on every output pulse of the postscaler. The
counter is subsequently reset to ‘0’. TMR5 is reset
upon a capture event.
Figure 17-13 shows the velocity measurement timing
diagram.
FIGURE 17-12:
VELOCITY MEASUREMENT BLOCK DIAGRAM
QEI
Control
Logic
Reset ^{TMR5 Reset}
Logic
TMR5 ^Clock
TCY
16
Velocity Mode
CAP3/QEB
CAP2/QEA
CAP1/INDX
Velocity Event
QEB
QEA
INDX
Direction
Clock
Velocity Capture
Postscaler
IC1
(VELR Register)
Position
Counter
 2010 Microchip Technology Inc.
DS39616D-page 167