PIC32MX575F256H-80I Datasheet, PDF (31/236 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-Bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
TABLE 1-1: PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Number⁽¹⁾
Pin Name _{64-Pin 100-Pin}
QFN/TQFP TQFP
121-Pin
XBGA
Pin
Type
Buffer
Type
Description
PMD0
PMD1
PMD2
PMD3
PMD4
PMD5
PMD6
PMD7
PMD8
PMD9
PMD10
PMD11
PMD12
PMD13
PMD14
PMD15
PMALL
PMALH
PMRD
PMWR
VBUS
VUSB
VBUSON
D+
D-
USBID
C1RX
C1TX
AC1RX
AC1TX
C2RX
C2TX
AC2RX
AC2TX
ERXD0
ERXD1
ERXD2
Legend:
Note 1:
2:
60
93
A4
I/O TTL/ST Parallel Master Port data (Demultiplexed
61
94
B4
I/O TTL/ST ^{Master mode) or address/data (Multiplexed}
62
98
B3
I/O TTL/ST ^{Master modes).}
63
99
A2
I/O TTL/ST
64
100
A1
I/O TTL/ST
1
3
D3
I/O TTL/ST
2
4
C1
I/O TTL/ST
3
5
D2
I/O TTL/ST
—
90
A5
I/O TTL/ST
—
89
E6
I/O TTL/ST
—
88
A6
I/O TTL/ST
—
87
B6
I/O TTL/ST
—
79
A9
I/O TTL/ST
—
80
D8
I/O TTL/ST
—
83
D7
I/O TTL/ST
—
84
C7
I/O TTL/ST
30
44
L8
O
— Parallel Master Port address latch enable
low byte (Multiplexed Master modes).
29
43
K7
O
— Parallel Master Port address latch enable
high byte (Multiplexed Master modes).
53
82
B8
O
— Parallel Master Port read strobe.
52
81
C8
O
— Parallel Master Port write strobe.
34
54
H8
I
Analog USB bus power monitor.
35
55
H9
P
— USB internal transceiver supply.
11
20
H1
O
— USB Host and OTG bus power control output.
37
57
H10
I/O Analog USB D+.
36
56
J11
I/O Analog USB D-.
33
51
K10
I
ST USB OTG ID detect.
58
87
B6
I
ST CAN1 bus receive pin.
59
88
A6
O
— CAN1 bus transmit pin.
32
40
K6
I
ST Alternate CAN1 bus receive pin.
31
39
L6
O
— Alternate CAN1 bus transmit pin.
29
90
A5
I
ST CAN2 bus receive pin.
21
89
E6
O
— CAN2 bus transmit pin.
—
8
E2
1
ST Alternate CAN2 bus receive pin.
—
7
E4
O
— Alternate CAN2 bus transmit pin.
61
41
J7
I
ST Ethernet Receive Data 0.⁽²⁾
60
42
L7
I
ST Ethernet Receive Data 1.⁽²⁾
59
43
K7
I
ST Ethernet Receive Data 2.⁽²⁾
CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels
TTL = TTL input buffer
Analog = Analog input
O = Output
P = Power
I = Input
Pin numbers are provided for reference only. See the “Pin Diagrams” section for device pin availability.
See Section 24.0 “Ethernet Controller” for more information.
 2010 Microchip Technology Inc.
Preliminary
DS61156C-page 31