PIC32MX575F256H-80I Datasheet, PDF (186/236 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-Bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
FIGURE 31-6:
TIMER1, 2, 3, 4, 5 EXTERNAL CLOCK TIMING CHARACTERISTICS
TxCK
TMRx
Tx10
Tx11
Tx15
OS60
Note: Refer to Figure 31-1 for load conditions.
Tx20
TABLE 31-23: TIMER1 EXTERNAL CLOCK TIMING REQUIREMENTS⁽¹⁾
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Param.
No.
Symbol
Characteristics⁽²⁾
Min.
Typical Max. Units Conditions
TA10 TTXH
TA11 TTXL
TA15 TTXP
TxCK
Synchronous, [(12.5 ns or 1 TPB)/N] —
High Time with prescaler
+ 25 ns
Asynchronous,
10
—
with prescaler
TxCK
Synchronous, [(12.5 ns or 1 TPB)/N] —
Low Time with prescaler
+ 25 ns
Asynchronous,
10
—
with prescaler
TxCK
Synchronous, [(Greater of 25 ns or
—
Input Period with prescaler 2 TPB)/N] + 30 ns
[(Greater of 25 ns or
—
2 TPB)/N] + 50 ns
Asynchronous,
20
—
with prescaler
50
—
OS60 FT1
SOSC1/T1CK Oscillator
32
—
Input Frequency Range
(oscillator enabled by setting
TCS bit (T1CON<1>))
TA20 TCKEXTMRL Delay from External TxCK
—
Clock Edge to Timer
Increment
Note 1: Timer1 is a Type A.
2: This parameter is characterized, but not tested in manufacturing.
3: N = Prescale Value (1, 8, 64, 256)
— ns Must also meet
parameter TA15
— ns
— ns Must also meet
parameter TA15
— ns
— ns VDD > 2.7V
— ns VDD < 2.7V
— ns VDD > 2.7V
(Note 3)
— ns VDD < 2.7V
(Note 3)
100 kHz
1 TPB
DS61156C-page 186
Preliminary
 2010 Microchip Technology Inc.