PIC32MX575F256H-80I Datasheet, PDF (205/236 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-Bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
TABLE 31-38: A/D CONVERSION TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Param.
No.
Symbol
Characteristics
Min. Typical⁽¹⁾ Max. Units
Conditions
Clock Parameters
AD50 TAD
A/D Clock Period⁽²⁾
65
—
—
ns See Table 31-37
Conversion Rate
AD55 TCONV Conversion Time
—
12 TAD
—
—
AD56 FCNV
Throughput Rate
(Sampling Speed)
—
—
1000 ksps AVDD = 3.0V to 3.6V
—
—
400 ksps AVDD = 2.5V to 3.6V
AD57 TSAMP Sample Time
1
—
31
TAD TSAMP must be  132 ns
Timing Parameters
AD60 TPCS
Conversion Start from Sample
Trigger⁽³⁾
—
1.0 TAD
—
— Auto-Convert Trigger
(SSRC<2:0> = 111)
not selected
AD61 TPSS
Sample Start from Setting
Sample (SAMP) bit
0.5 TAD
—
1.5 TAD —
AD62 TCSS
Conversion Completion to
Sample Start (ASAM = 1)⁽³⁾
—
0.5 TAD
—
—
AD63 TDPU Time to Stabilize Analog Stage
—
—
from A/D Off to A/D On⁽³⁾
2
s
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Because the sample caps will eventually lose charge, clock rates below 10 kHz can affect linearity
performance, especially at elevated temperatures.
3: Characterized by design but not tested.
 2010 Microchip Technology Inc.
Preliminary
DS61156C-page 205