PIC32MX575F256H-80I Datasheet, PDF (175/236 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-Bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
TABLE 31-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Parameter
No.
Typical⁽²⁾
Max.
Units
Conditions
Power-Down Current (IPD) (Note 1)
DC40
10
40
A
-40°C
DC40a
36
100
A
+25°C
2.3V Base Power-Down Current (Note 6)
DC40b
400
720
A
+85°C
DC40c
41
120
A
+25°C
3.3V Base Power-Down Current
DC40d
22
80
A
-40°C
DC40e
DC40g
42
315
120
400
A
A
+25°C
+70°C
3.6V Base Power-Down Current
DC40f
410
800
A
+85°C
Module Differential Current
DC41
—
10
A
2.3V
Watchdog Timer Current: IWDT (Notes 3, 6)
DC41c
5
—
A
3.3V
Watchdog Timer Current: IWDT (Note 3)
DC41d
—
20
A
3.6V
Watchdog Timer Current: IWDT (Note 3)
DC42
—
40
A
2.3V
RTCC + Timer1 w/32 kHz Crystal: IRTCC
(Notes 3, 6)
DC42c
23
—
A
3.3V
RTCC + Timer1 w/32 kHz Crystal: IRTCC
(Note 3)
DC42e
—
50
A
3.6V
RTCC + Timer1 w/32 kHz Crystal: IRTCC
(Note 3)
DC43
—
1300
A
2.5V
ADC: IADC (Notes 3, 4, 6)
DC43c
1100
—
A
3.3V
ADC: IADC (Notes 3, 4)
DC43e
—
1300
A
3.6V
ADC: IADC (Notes 3, 4)
Note 1: Base IPD is measured with all digital peripheral modules and being clocked, CPU clock is disabled. All I/Os
are configured as inputs and pulled low. WDT and FSCM are disabled.
2: Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
3: The  current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
4: Test conditions for ADC module differential current are as follows: Internal ADC RC oscillator enabled.
5: Data is characterized at +70°C and not tested. Parameter is for design guidance only.
6: This parameter is characterized, but not tested in manufacturing.
 2010 Microchip Technology Inc.
Preliminary
DS61156C-page 175