PIC32MX575F256H-80I Datasheet, PDF (147/236 Pages) Microchip Technology – High-Performance, USB, CAN and Ethernet 32-Bit Flash Microcontrollers

PIC32MX5XX/6XX/7XX
25.0 COMPARATOR
Note 1: This data sheet summarizes the features
of the PIC32MX5XX/6XX/7XX family of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this
data sheet, refer to Section 19.
“Comparator”
(DS61110) in the
“PIC32MX Family Reference Manual”,
which is available from the Microchip web
site (www.microchip.com/PIC32).
2: Some registers and associated bits
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
The PIC32MX5XX/6XX/7XX analog comparator
module contains two comparators that can be
configured in a variety of ways.
Following are some of the key features of this module:
• Selectable Inputs Available Include:
- Analog inputs multiplexed with I/O pins
- On-chip internal absolute Voltage Reference
(IVREF)
- Comparator Voltage Reference (CVREF)
• Outputs can be Inverted
• Selectable Interrupt Generation
A block diagram of the comparator module is shown in
Figure 25-1.
FIGURE 25-1:
C1IN+⁽¹⁾
CVREF⁽²⁾
C1IN-
C1IN+
C2IN+
IVREF⁽²⁾
C2IN+
CVREF⁽²⁾
C2IN-
C2IN+
C1IN+
IVREF⁽²⁾
COMPARATOR BLOCK DIAGRAM
CREF
Comparator 1
ON
CPOL
CCH<1:0>
C1
CREF
Comparator 2
ON
CPOL
CCH<1:0>
C2
COUT (CM1CON)
C1OUT (CMSTAT)
C1OUT
COE
COUT (CM2CON)
C2OUT (CMSTAT)
C2OUT
COE
Note 1:
2:
On devices with a USB module, and when the module is enabled, this pin is controlled by the USB module,
and therefore, is not available as a comparator input.
Internally connected.
 2010 Microchip Technology Inc.
Preliminary
DS61156C-page 147