1EDI2001AS_15 Datasheet, PDF (120/135 Pages) Infineon Technologies AG – Single Channel Isolated Driver for Inverter Systems AD Step

EiceDRIVER™ SIL
1EDI2001AS
Specification
5.3
Operating range
The following operating conditions must not be exceeded in order to ensure correct operation of the 1EDI2001AS.
All parameters specified in the following sections refer to these operating conditions, unless otherwise noticed.
Table 5-3 Operating Conditions
Parameter
Symbol
Values
Unit Note / Test Condition
Min.
Typ.
Max.
Ambient temperature
T_amb
-40
-
125
°C
Positive power supply (primary)
V_CC1
4.65
5.0
5.5
V
Positive power supply (secondary) V_CC2
13.0
15.0
18.0
V
Negative power supply
V_EE2
-10.0
-8.0
-5.0
V
PWM switching frequency
f_sw
-
-
30
kHz
Common Mode Transient Immunity dV_ISO/dt -50
-
50
kV/μs
1) Deterministic and correct operation of the device is ensured down to V_UVLO1L.
2) Deterministic and correct operation of the device is ensured down to V_UVLO2L and up to 28V.
3) Deterministic and correct operation of the device is ensured up to 0.3V.
4) Maximum junction temperature of the device must not be exceeded.
5) Not subject to production test. This parameter is verified by design / characterization.
Referenced to GND1¹⁾
Referenced to GND2²⁾
Referenced to GND2³⁾
4)
At 500 V⁵⁾
5.4
Thermal Characteristics
The indicated thermal parameters apply to the full operating range, unless otherwise specified.
Table 5-4 Thermal Characteristics
Parameter
Symbol
Values
Unit
Min.
Typ.
Max.
Thermal Resistance Junction to
R_THJA
-
60
-
K/W
Ambient
Thermal Resistance Junction to Case R_THJCBOT -
-
41
K/W
(bottom)
1) Not subject to production test. This parameter is verified by design / characterization.
Note / Test Condition
T_amb=25°C¹⁾
T_amb=25°C¹⁾,
Datasheet
120
Hardware Description
Rev. 3.1, 2015-07-30