|
1EDI2001AS_15 Datasheet, PDF (12/135 Pages) Infineon Technologies AG – Single Channel Isolated Driver for Inverter Systems AD Step | |||
|
◁ |
⢠Fully Programmable Active Clamping Inhibit signal (secondary side).
⢠Optimal support of EiceBoost functions.
⢠36-pin PG-DSO-36 green package.
⢠Automotive qualified (as per AEC Q100).
EiceDRIVER⢠SIL
1EDI2001AS
Product Definition
Safety Relevant Features
⢠Desaturation monitoring.
⢠Overcurrent protection.
⢠Fully programmable Two-Level Turn-Off.
⢠Automatic Emergency Turn-Off in failure case.
⢠Automatic or externally triggered disabling of the output stage (tristate).
⢠Under- and over-voltage supervision of all the power supplies (both primary and secondary sides).
⢠NFLTA and NFLTB notification pins for fast system response time (primary side).
⢠Safe internal state machine.
⢠Weak Turn-On functionality.
⢠Internal overtemperature sensor (secondary side).
⢠Internal clock monitoring.
⢠Gate signal monitoring.
⢠Individual error and status flags readable via SPI.
⢠Support for Active Short Circuit strategies.
⢠Full diagnosticability.
⢠In-application testability of safety critical functions.
⢠Suitable for systems up to ASIL D requirements (as per ISO 26262).
1.3
Target Applications
⢠Inverters for automotive Hybrid Electric Vehicles (HEV) and Electric Vehicles (EV).
⢠High Voltage DC/DC converter.
⢠Industrial Drive.
Datasheet
12
Hardware Description
Rev. 3.1, 2015-07-30
|
▷ |