C-3E Datasheet, PDF (74/114 Pages) Freescale Semiconductor, Inc – C-3e NETWORK PROCESSOR SILICON REVISION A1

74
CHAPTER 3: ELECTRICAL SPECIFICATIONS
Power Sequencing
It is intended that the VDD33/VDDT and VDD rails are sequenced to their final value
together for most applications. VDD33 and VDDT must be above VDD at all times. VDD
must be brought to its final value within 100ms of sequencing on VDD33 and VDDT.
It is also required that SCLK, SCLKX, TCLKI, PCLK, MDCLK, FTXCLK, and FRXCLK be running
or begin running during power sequencing to propagate reset inside the C-3e NP. Figure 9
indicates the relationship between the clocks and PRSTX. There is no requirement that the
asserting and deasserting edges of PRSTX be synchronous to the clocks. Reset must be
asserted within 100µs of power initiation. Typically, reset is held low during power
initiation.
Figure 9 Bringup Clock Timing Diagram
VDD, VDD33,
VDDT
≤100µs
PRSTX
TCLKI, PCLK,
SCLK, SCLKX,
MDCLK, FTXCLK,
FRXCLK
)(
³1ms
³100µs
)(
C3EN