M0564LE4AE Datasheet, PDF (99/161 Pages) List of Unclassifed Manufacturers – 32-BIT MICROCONTROLLER

M0564
6.14 Real Time Clock (RTC)
6.14.1 Overview
The Real Time Clock (RTC) controller provides the real time and calendar message. The RTC
offers programmable time tick and alarm match interrupts. The data format of time and calendar
messages are expressed in BCD format. A digital frequency compensation feature is available to
compensate external crystal oscillator frequency accuracy.
6.14.2 Features
 Supports real time counter in RTC_TIME (hour, minute, second) and calendar counter in
RTC_CAL (year, month, day) for RTC time and calendar check
 Supports alarm time (hour, minute, second) and calendar (year, month, day) settings in
RTC_TALM and RTC_CALM
 Supports alarm time (hour, minute, second) and calendar (year, month, day) mask enable
in RTC_TAMSK and RTC_CAMSK
 Selectable 12-hour or 24-hour time scale in RTC_CLKFMT register

 Supports Leap Year indication in RTC_LEAPYEAR register
 Supports Day of the Week counter in RTC_WEEKDAY register
 Frequency of RTC clock source compensate by RTC_FREQADJ register
 All time and calendar message expressed in BCD format
 Supports periodic RTC Time Tick interrupt with 8 period interval options 1/128, 1/64,
1/32, 1/16, 1/8, 1/4, 1/2 and 1 second
 Supports RTC Time Tick and Alarm Match interrupt
 Supports chip wake-up from Idle or Power-down mode while an RTC interrupt signal is
generated
 Supports Daylight Saving Time backup control in RTC_DSTCTL
May 05, 2017
Page 99 of 161
Rev 1.00