M0564LE4AE Datasheet, PDF (17/161 Pages) List of Unclassifed Manufacturers – 32-BIT MICROCONTROLLER

M0564
channel
– Supports digital comparator to monitor conversion result and user can select whether
to generate an interrupt when conversion result matches the compare register setting
– An A/D conversion can be triggered by:
 Software enable
 External pin (STADC)
 Timer 0~3 overflow pulse trigger
 PWM triggers with optional start delay period
– Supports 4 internal channels for
 Operational amplifier output
 Band-gap VBG input
 Temperature sensor input
 VBAT voltage measure
– Supports internal reference voltage: 2.048V, 2.560V, 3.072V and 4.096V
– Supports PDMA transfer
Analog Comparator
– Supports up to 2 rail-to-rail analog comparators
– Supports 4 multiplexed I/O pins at positive node.
– Supports I/O pin and internal voltages at negative node
– Support selectable internal voltage reference from:
 Band-gap V_BG
 Voltage divider source from AV_DD and internal reference voltage.
– Supports programmable hysteresis
– Supports programmable speed and power consumption
– Interrupts generated when compare results change, interrupt event condition is
programmable.
– Supports power-down wake-up
– Supports triggers for break events and cycle-by-cycle control for PWM
Cyclic Redundancy Calculation Unit
– Supports four common polynomials CRC-CCITT, CRC-8, CRC-16, and CRC-32
– Programmable initial value
– Supports programmable order reverse setting for input data and CRC checksum
– Supports programmable 1’s complement setting for input data and CRC checksum.
– Supports 8/16/32-bit of data width
– Interrupt generated once checksum error occurs
User Configurable VDD1=1.8~5.5V IO Interface
– Supports UART0, SPI0 and I2C0
Supports 96-bit Unique ID (UID)
Supports 128-bit Unique Customer ID (UCID)
One built-in temperature sensor with 1℃ resolution
Brown-out detector
– With 8 levels: 4.3 V/ 3.7V/ 2.7V/ 2.2V
– Supports Brown-out Interrupt and Reset option
Low Voltage Reset
– Threshold voltage levels: 2.0 V
Power consumption
– Chip power down current < 10 uA with RAM data retention.
– V_BAT power domain operating current <1.5 uA
Operating Temperature: -40℃~105℃
May 05, 2017
Page 17 of 161
Rev 1.00