AMIS-53050 Datasheet, PDF (95/107 Pages) AMI SEMICONDUCTOR – Frequency Agile Transceiver

AMIS-53050 Frequency Agile Transceiver
7.2.9. Timing Diagrams for Various Packet Framing Modes
7.2.9.1. Use ID Enabled, No CRC, No Packet Length
Table 104: Receive
Parameter Action
ID
Data interface immediately ready after ID detected
No LOP
Radio stays in RX until instructed to change
Data is shifted out data port as received
No CRC Error checking is not performed and CRC is not attached to packet
Table 105: Transmit
Parameter Action
Transmit command immediately powers the transmitter on
Transmit Transmits preamble
AMIS-53050 returns to standby after Transmission completes
ID
Transmits the ID
DSSN
Starts data interface and uses a synchronous clock to clock in the TX data (Master only)
Data Sheet
Figure 49: Data Interface Protocol (ID only)
AMI Semiconductor – Jan. 07, M-20639-002
95
www.amis.com