AMIS-53050 Datasheet, PDF (50/107 Pages) AMI SEMICONDUCTOR – Frequency Agile Transceiver

AMIS-53050 Frequency Agile Transceiver
Data Sheet
Figure 35: Typical Crystal Temperature Curve for Crystal with Type 2 Characteristics
6.4.2. 10kHz Oscillator
The AMIS-53050 has an internal 10kHz oscillator which is active in stand-by or idle modes. This very low power oscillator provides the
clock for timing functions such as sniff receive, burst transmit or housekeeping. The oscillator is trimmed in the calibration instructions.
Register descriptions:
10k Oscillator Trim- The value of the calibration for the 10kHz oscillator. (See Section 6.10.1.4)**
6.4.3. System Clock
The AMIS-53050 provides a divided version of the external reference oscillator (typically 24MHz) as an output to an external host
controller or other circuits needing a clock.
AMI Semiconductor – Jan. 07, M-20639-002
50
www.amis.com