AK4373 Datasheet, PDF (90/98 Pages) Asahi Kasei Microsystems – Low Power Stereo DAC with HP/SPK-Amp

[AK4373]
3. PLL Slave Mode (MCKI pin)
Example:
Audio I/F Format: MSB justified
Input Master Clock Select at PLL Mode: 11.2896MHz
MCKO: Enable
Sampling Frequency: 44.1kHz
Power Supply
PDN pin
PMVCM bit
(Addr:00H, D6)
MCKO bit
(Addr:01H, D1)
PMPLL bit
(Addr:01H, D0)
MCKI pin
MCKO pin
BICK pin
LRCK pin
(1)
(2) (3)
(4)
(5)
Input
40msec(max)
(6)
(7)
(8)
Output
Input
(1) Power Supply & PDN pin = “L” Æ “H”
(2)Addr:04H, Data:4AH
Addr:05H, Data:27H
(3)Addr:00H, Data:40H
(4)Addr:01H, Data:03H
MCKO output start
BICK and LRCK input start
Figure 73. Clock Set Up Sequence (3)
<Example>
(1) After Power Up: PDN pin “L” Æ “H”
“L” time of 150ns or more is needed to reset the AK4373.
(2) DIF1-0, PLL3-0 and FS3-0 bits should be set during this period.
(3) Power Up VCOM: PMVCM bit = “0” Æ “1”
VCOM must first be powered up before the other block operates.
(4) Enable MCKO output: MCKO bit = “1”
(5) PLL starts after that the PMPLL bit changes from “0” to “1” and PLL reference clock (MCKI pin) is supplied.
PLL lock time is 40ms(max).
(6) The normal clock is output from MCKO after PLL is locked.
(7) The invalid frequency is output from MCKO during this period.
(8) BICK and LRCK clocks should be synchronized with MCKO clock.
MS0991-E-00
- 90 -
2008/09