AK4951AEN Datasheet, PDF (9/105 Pages) Asahi Kasei Microsystems – 24bit Stereo CODEC with MIC/HP/SPK-AMP

[AK4951A]
■ Handling of Unused Pin
Unused I/O pins must be processed appropriately as below.
Classification Pin Name
Analog
MPWR, SPN, SPP, HPL, HPR, CP, CN, VEE,
LIN1/DMDAT, RIN1/DMCLK, LIN2, RIN2, LIN3,
RIN3/BEEP
Digital
MCKI, SDTI
SDTO
Setting
Open
Connect to VSS2
Open
6. Absolute Maximum Ratings
(VSS1=VSS2=VSS3=0V; Note 2)
Parameter
Symbol
Min.
Max.
Unit
Power Supplies
Analog
AVDDam
0.3
Digital
DVDDam
0.3
Digital I/O
TVDDam
0.3
Speaker-Amp SVDDam
0.3
6.0
V
2.5
V
6.0
V
6.0
V
Input Current, Any Pin Except Supplies
IIN
-
10
mA
Analog Input Voltage (Note 3)
VINA
0.3
AVDD+0.3
V
Digital Input Voltage (Note 4)
Ambient Operating Temperature
(powered applied)
VIND
Ta
0.3
TVDD+0.3
V
40
85
C
Storage Temperature
Maximum Power Dissipation (Note 5)
Tstg
65
Pd
-
150
C
840
mW
Note 2. All voltages are with respect to ground. VSS1, VSS2 and VSS3 must be connected to the same
analog ground plane.
Note 3. LIN1, RIN1, LIN2, RIN2, LIN3 and RIN3/BEEP pins
Note 4. PDN, CCLK/SCL, CSN/SDA, CDTIO/CAD0, SDTI, LRCK, BICK and MCKI pins
Pull-up resistors at the SDA and SCL pins must be connected to a voltage in the range from TVDD
or more to 6V or less.
Note 5.This power is the AK4951A internal dissipation that does not include power dissipation of
externally connected speakers. The maximum junction temperature is 125C and θja (Junction to
Ambient) is 42C/W at JESD51-9 (2p2s). When Pd =840mW and the θja is 42C/W, the junction
temperature does not exceed 125C. In this case, the AK4951A will not be damaged by its internal
power dissipation. Therefore, the AK4951A should be used in the condition of θja ≤ 42C/W.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
016001936-E-00
-9-
2016/03