XC2V4000 Datasheet, PDF (85/311 Pages) Xilinx, Inc – Summary of Features

R
Virtex™-II Platform FPGAs: DC and Switching Characteristics
Date
07/30/01
10/02/01
10/05/01
10/12/01
11/28/01
01/03/02
07/16/02
09/26/02
12/06/02
05/07/03
06/19/03
Version
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.5.1
Revision
• Updated values in the Virtex-II Performance Characteristics and Virtex-II
Switching Characteristics tables.
• Added values to the Virtex-II Pin-to-Pin Output Parameter Guidelines and Virtex-II
Pin-to-Pin Input Parameter Guidelines tables.
• Added Frequency Synthesis table.
• Updated values in the Virtex-II Performance Characteristics and Virtex-II
Switching Characteristics tables.
• Updated the speed grade designations used in data sheets, and added Table 13,
which shows the current speed grade designation for each device.
• Corrected the speed grade designation for the XC2V1000 device in Table 13.
• Updated values in the Virtex-II Performance Characteristics and Virtex-II
Switching Characteristics tables.
• Updated values in Table 3, Table 4, Table 5, Virtex-II Performance Characteristics,
and Virtex-II Switching Characteristics tables.
• Updated values in Virtex-II Performance Characteristics and Virtex-II Switching
Characteristics tables, based on values extracted from speedsfile version 1.96.
• Changed the speed grade designation for the XC2V6000 device in Table 13.
• Updated values in Table 4, "Quiescent Supply Current."
• Updated values in Virtex-II Performance Characteristics and Virtex-II Switching
Characteristics tables, based on values extracted from speedsfile version 1.111.
• Added Enhanced Multiplier Switching Characteristics section.
• Added footnote to Table 33, "Global Clock Setup and Hold for LVTTL Standard,
Without DCM."
• Added Source-Synchronous Switching Characteristics section.
• Removed mention of MIL-M-38510/605 specification.
• Added footnotes to Table 2 and Table 6.
• Revised SSTL2 values in Table 6 to match the latest JEDEC specification.
• Added footnote regarding V_IN PCI compliance to Table 1.
• Added footnote regarding CLKOUT_DUTY_CYCLE_DLL to Table 37.
• Updated values in Virtex-II Performance Characteristics and Virtex-II Switching
Characteristics tables, based on values extracted from speedsfile version 1.114.
• Table 4, Quiescent Supply Current, and Table 5, Minimum Power On Current
Required for Virtex-II Devices: Added parameters for XC2V8000 device.
• Table 16, IOB Output Switching Characteristics: Changed parameter designator
T_IOTON to T_IOTP.
• Table 25, Enhanced Multiplier Switching Characteristics: Corrected all parameter
designators from T_{MULT_P[nn]} to T_{MULT1_P[nn]} in order to correspond with designators
used in speedsfile.
• Table 26, Enhanced Pipelined Multiplier Switching Characteristics: Corrected all
parameter designators from T_{MULTCK_P[nn]} to T_{MULTCK1_P[nn]} in order to correspond
with designators used in speedsfile.
• Removed old Table 19, Standard Capacitive Loads.
• Added Figure 1, page 18, showing test configuration for measuring I/O standard
adjustments.
• Removed footnotes in Table 30 and Table 32 that stated DCM jitter was included in the
measurements.
DS031-3 (v3.0) August 1, 2003
Product Specification
www.xilinx.com
1-800-255-7778
Module 3 of 4
37