THS3217 Datasheet, PDF (28/73 Pages) Texas Instruments – THS3217 DC to 800-MHz, Differential-to-Single-Ended, DAC Output Amplifier

THS3217
SBOS766B – FEBRUARY 2016 – REVISED FEBRUARY 2016
www.ti.com
8.8 Midscale Buffer R_OUT Versus C_LOAD Measurement
For the tests in Figure 53 and Figure 54, the circuit shown in Figure 75 was used. The 150-Ω load circuit
configured as shown, provides a 50-Ω path from the network analyzer back to the output of the buffer. As shown
in Figure 75, place R_OUT below the load capacitor to improve the phase margin for the closed-loop buffer output,
while adding 0-Ω dc impedance into the line connected to the VREF pin.
Network
Analyzer
GND Port 1
50
Port 2
50
+VCC2
16
150Ÿ
Load
50 k
VMID_IN
1
VMID_OUT
118
x1
15
49.9
50 k
CLOAD
88.7
ROUT
5
-VCC2
Figure 75. R_S Versus C_LOAD Measurement Circuit
28
Submit Documentation Feedback
Product Folder Links: THS3217
Copyright © 2016, Texas Instruments Incorporated