MSP430FR6889 Datasheet, PDF (160/176 Pages) Texas Instruments – Mixed-Signal Microcontrollers

MSP430FR6889, MSP430FR68891, MSP430FR6888, MSP430FR6887
MSP430FR5889, MSP430FR58891, MSP430FR5888, MSP430FR5887
SLASE32A – AUGUST 2014 – REVISED MARCH 2015
www.ti.com
"Developmental product is intended for internal evaluation purposes."
MSP devices and MSP development-support tools have been characterized fully, and the quality and
reliability of the device have been demonstrated fully. TI's standard warranty applies.
Predictions show that prototype devices (XMS and PMS) have a greater failure rate than the standard
production devices. Texas Instruments recommends that these devices not be used in any production
system because their expected end-use failure rate still is undefined. Only qualified production devices are
to be used.
TI device nomenclature also includes a suffix with the device family name. This suffix indicates the
package type (for example, PZ) and temperature range (for example, I). Figure 8-1 provides a legend for
reading the complete device name for any family member.
MSP 430 FR 6 9891 I PZ T
Feature Set
Processor Family
430 MCU Platform
Optional: Distribution Format
Device Type
Packaging
Series
Optional: Temperature Range
AES
Optional: BSL
ESI FRAM
Processor MSP = Mixed Signal Processor
Family
XMS = Experimental Silicon
430 MCU
Platform
TI’s 16-bit Low-Power Microcontroller Platform
Device
Type
Memory Type
FR = FRAM
Series
Feature
Set
FRAM 6 Series = Up to 16 MHz With LCD
FRAM 5 Series = Up to 16 MHz Without LCD
First Digit - AES
9 = AES
8 = No AES
Second Digit - Extended Scan Interface
8 = ESI
7 = No ESI
2 = No ESI, LCD, 64 pins
Optional:
S = 0°C to 50°C
Temperature I = –40°C to 85°C
Range
T = –40°C to 105°C
Third Digit - FRAM (KB)
9 = 128
8 = 96
7 = 64
6 = 48
Optional Fourth Digit - BSL
1 = I²C
No value = UART
Packaging www.ti.com/packaging
Optional:
Distribution
Format
Optional:
Additional
Features
T = Small Reel
R = Large Reel
No Markings = Tube or Tray
-Q1 = Automotive Qualified
-EP = Enhanced Product (–40°C to 105°C)
-HT = Extreme Temperature Parts (–55°C to 150°C)
NOTE: This figure does not represent a complete list of the available features and options, and does not indicate that all of
these features and options are available for a given device or family.
Figure 8-1. Device Nomenclature – Part Number Decoder
160 Device and Documentation Support
Copyright © 2014–2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: MSP430FR6889 MSP430FR68891 MSP430FR6888 MSP430FR6887 MSP430FR5889
MSP430FR58891 MSP430FR5888 MSP430FR5887