SM320C6727B-EP Datasheet, PDF (103/109 Pages) Texas Instruments – Floating-Point Digital Signal Processor

SM320C6727B-EP
www.ti.com
SPRS793A – SEPTEMBER 2011 – REVISED OCTOBER 2011
Table 4-40. Allowed PLL Operating Conditions
PARAMETER
DEFAULT VALUE
ALLOWED SETTING OR RANGE
MIN
MAX
1 PLLRST = 1 assertion time during initialization
N/A
125 ns
2 Lock time before setting PLLEN = 1. After changing D0, PLLM, or
N/A
input clock.
3 PLL input frequency (PLLREF after D0⁽¹⁾)
187.5 µs
12 MHz
50 MHz
4 PLL multiplier values (PLLM)
x13
5 PLL output frequency (PLLOUT before dividers D1, D2, D3)⁽²⁾
N/A
x4
140 MHz
x25
600 MHz
6 SYSCLK1 frequency (set by PLLM and dividers D0, D1)
PLLOUT/1
Device Frequency
Specification
7 SYSCLK2 frequency (set by PLLM and dividers D0, D2)
PLLOUT/2
/2, /3, or /4 of SYSCLK1
8 SYSCLK3 frequency (set by PLLM and dividers D0, D3)
PLLOUT/3
EMIF Frequency
Specification
(1) Some values for the D0 divider produce results outside of this range and should not be selected.
(2) In general, selecting the PLL output clock rate closest to the maximum frequency will decrease clock jitter.
CAUTION
SYSCLK1, SYSCLK2, SYSCLK3 must be configured as aligned by setting ALNCTL[2:0]
to '1'; and the PLLCMD.GOSET bit must be written every time the dividers D1, D2, and
D3 are changed in order to make sure the change takes effect and preserves alignment.
CAUTION
When changing the PLL parameters which affect the SYSCLK1, SYSCLK2, SYSCLK3
dividers, the bridge BR2 in Figure 2-4 must be reset by the CFGBRIDGE register. See
Table 2-7.
The PLL is an analog circuit and is sensitive to power supply noise. Therefore it has a dedicated 3.3-V
power pin (PLLHV) that should be connected to DV_DD at the board level through an external filter, as
illustrated in Figure 4-46.
BOARD
DV_DD (3.3 V)
Place Filter and Capacitors as Close
to DSP as Possible
EMI
Filter
10 mF ⁺
0.1 mF
EMI Filter: TDK ACF451832−333, −223, −153, or −103,
Panasonic EXCCET103U, or Equivalent
Figure 4-46. PLL Power Supply Filter
PLLHV
Copyright © 2011, Texas Instruments Incorporated
Peripheral and Electrical Specifications 103
Submit Documentation Feedback
Product Folder Link(s): SM320C6727B-EP