English
Language : 

TMDS171 Datasheet, PDF (1/62 Pages) Texas Instruments – 3.4 Gbps TMDS RETIMER
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TMDS171, TMDS171I
SLLSEN7A – OCTOBER 2015 – REVISED DECEMBER 2015
TMDS171/I 3.4 Gbps TMDS RETIMER
1 Features
•1 HDMI Input Port to Output Port with CDR
Supporting up to 3.4 Gbps Data Rates
• Compatible with HDMI1.4b Electrical Parameters.
• Support for 4k2k30p and up to WUXGA 12-bit
Color Depth or 1080p with Higher Refresh
Rates™
• Retimes Input Stream to Compensate for Random
Jitter
• Adaptive Receiver Equalizer or Programmable
Fixed Equalizer
• I2C and Pin Strap Programmable
• Inter-Pair Skew Compensation of 5+ Bits
• Link Debug Tools Including Eye Diagram After RX
Equalizer
• Single Ended Mode ARC Support
• 48-pin 7mm x 7mm 0.5 mm Pitch VQFN Package
• Extended Commercial Temperature Support
0°C – 85°C (TMDS171)
• Industrial Temperature Support -40°C – 85°C
(TMDS171I)
2 Applications
• Digital TV
• Digital Projector
• Audio/Video Equipment
• Blu-Ray DVD
• Monitors
• Desktops/ All-in-Ones
• Active Cables
3 Description
The TMDS171 is a digital video interface (DVI) or
high-definition multimedia interface (HDMI) retimer.
The TMDS171 supports four TMDS channels, Audio
Return Channel (SPDIF_IN/ARC_OUT), Hot Plug
Detect (HPD) and Digital Display Control (DDC)
interfaces. The TMDS171 supports signaling rates up
to 3.4 Gbps to allow for the highest resolutions of
4k2k30p 24 bits per pixel and up to WUXGA 12-bit
color depth or 1080p with higher refresh rates. The
TMDS171 automatically configures itself as a re-
driver at low data rate (< 1 Gbps) or as a re-timer
above this data rate.
The TMDS171 supports dual power supply rails of
1.2 V on VDD and 3.3 V on VCC for active power
reduction. Several methods of power management
are implemented to reduce overall power
consumption. TMDS171 supports fixed EQ gain or
adaptive EQ control by I2C or pin strap to
compensate for different lengths input cable or board
traces.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TMDS171
TMDS171I
(VQFN) 48 Pins
7.00 mm x 7.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic
HDMI/DVI
Connector
TMDS171
IN_D2p/n
OUT_D2p/n
IN_D1p/n
OUT_D1p/n
IN_D0p/n
OUT_D0p/n
IN_CLKp/n OUT_CLKp/n
3.3 V - 5 V
HDMI
Receiver
TMDS RX
3.3 V - 5 V
SCL_SRC
SDA_SRC
HPD_SRC
ARC_OUT
OE
VSADJ
SCL_SNK
SDA_SNK
HPD_SNK
SPDIF_IN
I2C
3.3 V
DDC
HPD
SPDIF
SCL_CTL
SDA_CTL
Digital TV
Audiovisual
Processing HDMI
Unit
SW/HD
Interface
Unit
TMDS
171
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.