CC2430 Datasheet, PDF (198/234 Pages) Texas Instruments – A True System-on-Chip solution for 2.4 GHz IEEE 802.15.4 / ZigBee-TM

CC2430
14.34.8.18 STXONCCA
Function:
Enable calibration and TX
if CCA indicates a clear channel
Description: The
STXONCCA
instruction enables TX after calibration if
CCA indicates a clear channel. The
instruction waits for the radio to
acknowledge the command before
executing the next instruction.
Operation: STXONCCA
Opcode:
76543210
11000100
14.34.8.19 SRFOFF
Function:
Disable RX/TX and
frequency synthesizer.
Description: The SRFOFF instruction
asserts disables RX/TX and the frequency
synthesizer. The instruction waits for the
radio to acknowledge the command before
executing the next instruction.
Operation: SRFOFF
Opcode:
76543210
11000101
14.34.8.20 SFLUSHRX
Function:
Flush RXFIFO buffer and
reset demodulator
Description: The
SFLUSHRX
instruction flushes the RXFIFO buffer and
resets the demodulator. The instruction
waits for the radio to acknowledge the
command before executing the next
instruction.
Operation: SFLUSHRX
Opcode:
76543210
11000110
14.34.8.21 SFLUSHTX
Function:
Flush TXFIFO buffer
Description: The
SFLUSHTX
instruction flushes the TXFIFO buffer. The
instruction waits for the radio to
acknowledge the command before
executing the next instruction.
Operation: SFLUSHTX
Opcode:
76543210
11000111
14.34.8.22 SACK
Function:
Send acknowledge frame
with pending field cleared
Description: The SACK instruction
sends an acknowledge frame. The
instruction waits for the radio to
acknowledge the command before
executing the next instruction.
Operation: SACK
Opcode:
76543210
11001000
CC2430 PRELIMINARY Data Sheet (rev. 1.03) SWRS036A
Page 198 of 232