CC2430 Datasheet, PDF (200/212 Pages) Texas Instruments – A True System-on-Chip solution for 2.4 GHz IEEE 802.15.4 / ZigBee-TM

FSMTC1 (0xDF54)
Bit Name
7:6 -
5
ABORTRX_ON_SRXON
4
RX_INTERRUPTED
3
AUTO_TX2RX_OFF
2
RX2RX_TIME_OFF
1
PENDING_OR
0
ACCEPT_ACKPKT
CHVER (0xDF60)
Bit Name
7:0 VERSION[7:0]
CHIPID (0xDF61)
Bit Name
7:0 CHIPID[7:0]
Radio : Radio Registers
CC2430
Reset
00
1
0
0
0
0
1
R/W
R0
R/W
R
R/W
R/W
R/W
R/W
Description
Reserved, read as 0.
Abort RX when SRXON strobe is issued
0 : Packet reception is not aborted when SRXON is issued
1 : Packet reception is aborted when SRXON is issued
RX interrupted by strobe command
This bit is cleared when the next strobe is detected.
0 : Strobe command detected
1 : Packet reception was interrupted by strobe command
Automatically go to RX after TX. Applies to both data
packets and ACK packets.
0 : Automatic RX after TX
1 : No automatic RX after TX
Turns off the 12 symbol timeout after packet reception has
ended. Active high.
This bit is OR’ed with the pending bit from FFCTRL before it
goes to the modulator.
Accept ACK packet control.
0 : Reject all ACK packets
1 : ACK packets are received
Reset
0x03
R/W
R
Description
Chip revision number. The relationship between the value in
VERSION[7:0] and the die revision is as follows:
0x03 : Die revision D
The current number in VERSION[7:0] may not be
consistent with past or future die revisions of this product
Reset
0x85
R/W
R
Description
Chip identification number. Always read as 0x85.
CC2430 Data Sheet (rev. 2.1) SWRS036F
Page 200 of 211