CC2430 Datasheet, PDF (10/212 Pages) Texas Instruments – A True System-on-Chip solution for 2.4 GHz IEEE 802.15.4 / ZigBee-TM

CC2430
5 Absolute Maximum Ratings
Under no circumstances must the absolute maximum ratings given in Table 2 be violated. Stress
exceeding one or more of the limiting values may cause permanent damage to the device.
Table 2: Absolute Maximum Ratings
Parameter
Supply voltage
Voltage on any digital pin
Voltage on the 1.8V pins (pin no.
22, 25-40 and 42)
Input RF level
Storage temperature range
Reflow soldering temperature
ESD
Min
Max
Units Condition
–0.3
3.9
V
All supply pins must have the same voltage
–0.3
VDD+0.3,
V
max 3.9
–0.3
2.0
V
10
dBm
–50
150
°C Device not programmed
260
°C According to IPC/JEDEC J-STD-020C
<500
On RF pads (RF_P, RF_N, AVDD_RF1,
V
and AVDD_RF2), according to Human
Body Model, JEDEC STD 22, method A114
700
V
All other pads, according to Human Body
Model, JEDEC STD 22, method A114
200
V
According to Charged Device Model,
JEDEC STD 22, method C101
Caution! ESD sensitive device. Precaution should be used
when handling the device in order to prevent
permanent damage.
6 Operating Conditions
The operating conditions for CC2430 are listed in Table 3 .
Table 3: Operating Conditions
Parameter
Operating ambient temperature
range, T_A
Operating supply voltage
Min
Max
Unit Condition
-40
85
°C
2.0
3.6
V The supply pins to the radio part must be driven
by the 1.8 V on-chip regulator
CC2430 Data Sheet (rev. 2.1) SWRS036F
Page 10 of 211