RX62T_15 Datasheet, PDF (102/136 Pages) Renesas Technology Corp – Renesas MCUs

Under development ^{Preliminary document}
Specifications in this document are tentative and subject to change.
RX62T Group, RX62G Group
5. Electrical Characteristics
Table 5.3
DC Characteristics (2)
Note: Items for which test conditions are not specifically stated in the table below have the same values under conditions 1 to 3.
Condition 1: VCC = PLLVCC = 2.7 to 3.6 V, VSS = PLLVSS = AVSS0 = AVSS = VREFL0 = 0 V
AVCC0 = AVCC = 3.0 to 3.6 V, VREFH0 = 3.0 V to AVCC0, VREF = 3.0 V to AVCC
Condition 2: VCC = PLLVCC = 2.7 to 3.6 V, VSS = PLLVSS = AVSS0 = AVSS = VREFL0 = 0 V
AVCC0 = AVCC = 4.0 to 5.5 V, VREFH0 = 4.0 V to AVCC0, VREF = 4.0 V to AVCC
Condition 3: VCC = PLLVCC = 4.0 to 5.5 V, VSS = PLLVSS = AVSS0 = AVSS = VREFL0 = 0 V
AVCC0 = AVCC = 4.0 to 5.5 V, VREFH0 = 4.0 V to AVCC0, VREF = 4.0 V to AVCC
Ta = Topr. Ta is the same under conditions 1 to 3.
Item
Supply
current*1
In operation
Max.*2
Normal*4
Increased by BGO
operation*5
Symbol
I_CC^*3
Min.
-
-
-
Typ.
-
35
15
Max. Unit
70
mA
-
-
Test
Conditions
ICLK =
100 MHz
PCLK =
50 MHz
Sleep
All-module-clock-stop mode*6
Standby
mode
Software standby mode
Deep software standby
mode
22
60
14
28
-
0.10 3
mA
-
20
60
A
Analog power During 12-bit A/D conversion (when a
AI_CC0
supply current sample-and-hold circuit is in use; per unit)
-
3
5
mA
During 12-bit A/D conversion (when a
sample-and-hold circuit is not in use; per
unit)
-
3
5
mA
Programmable gain amp (per channel)
-
1
2
mA
Window comparator (1 channel)
Window comparator (6 channels)
During 12-bit A/D conversion (per unit)
During 10-bit A/D conversion (per unit)
Waiting for 10-bit A/D conversion (all units)
AI_CC
0.5
1
mA
-
1
2
mA
-
60
90
A
-
0.9
2
mA
-
0.3
3
A
Reference
During 12-bit A/D conversion (per unit)
AI_REFH0
-
power supply
current
Waiting for 12-bit A/D conversion (all units)
-
During 10-bit A/D conversion (per unit)
AI_REF
-
Waiting for 10-bit A/D conversion (all units)
-
VCC rising gradient
SV_CC
-
1.6
3
1.6
3
0.1
1
0.1
3
-
20
mA
mA
mA
A
ms/V
Note 1. Supply current values are with all output pins unloaded.
Note 2. Measured with clocks supplied to the peripheral functions. This does not include the BGO operation.
Note 3. I_CC depends on f (ICLK) as follows. (ICLK: PCLK = 8:4)
ICC max. = 0.54 x f + 16 (max.)
ICC max. = 0.3 x f + 5 (normal operation)
ICC max. = 0.44 x f + 16 (sleep mode)
Note 4. Measured with clocks not supplied to the peripheral functions. This does not include the BGO operation.
Note 5. Incremented if data is written to or erased from the ROM or data flash for data storage during the program execution.
Note 6. The values are for reference.
R01DS0096EJ0200 Rev.2.00
Jan 10, 2014
Page 102 of 134