N25Q128 Datasheet, PDF (172/185 Pages) Numonyx B.V – 128-Mbit, 1.8 V, multiple I/O, 4-Kbyte subsector erase on boot sectors, XiP enabled, serial flash memory with 108 MHz SPI bus interface

DC and AC parameters
N25Q128 - 1.8 V
Table 32. DC Characteristics
Symbol
Parameter
Test condition (in addiction
to those in Table 29.:
Min
Operating conditions)
Max Unit
ILI
ILO
ICC1
ICC2
ICC3
ICC4
ICC5
ICC6
VIL
VIH
VOL
VOH
Input leakage current
±2
µA
Output leakage current
±2
µA
Standby current
S = VCC, VIN = VSS or VCC
70
µA
Deep Power-down current
S = VCC, VIN = VSS or VCC
10
µA
Operating current (Fast Read Single I/O)
C = 0.1VCC / 0.9VCC at 108
MHz, DQ1 = open
C = 0.1VCC / 0.9VCC at 54
MHz, DQ1 = open
15
mA
6
mA
Operating current (Fast Read Dual I/O)
C = 0.1VCC / 0.9VCC at
108 MHz
18
mA
Operating current (Fast Read Quad I/O)
C = 0.1VCC / 0.9VCC at
108 MHz
20
mA
Operating current (Page Program Single,
Dual and Quad I/O)
S = VCC
20
mA
Operating current (WRSR)
S= VCC
20
mA
Operating current (SE)
S = VCC
20
mA
Input low voltage
– 0.5 0.3VCC V
Input high voltage
0.7VCC VCC+0.4 V
Output low voltage
IOL = 1.6 mA
0.4
V
Output high voltage
IOH = –100 µA
VCC–0.2
V
172/185