M306V2ME Datasheet, PDF (196/276 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER

MITSUBISHI MICROCOMPUTERS
M306V2ME-XXXFP
M306V2EEFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
Depending on the relationship of OSDL enable/disable mode, display mode and character code, note the conditions below.
OSDL enable/
disable mode
Display mode
& character code
OSDL enable mode
(Bit 0 of OSD control register 4 = “0”)
OSDL disable mode
(Bit 0 of OSD control register 4 = “1”)
Display mode
CC
OSDS/P OSDL
CC
OSDS/P OSDL
00016
to
S
0FF16
Used
Used
Not used
(See note 3)
Used
Used
Display OFF
10016
to
1FF16
Used
Used
L _{(See note 1) (See note 1)}
Specified
character
code
20016
to
27F16
Used
28016
to
2FF16
Not used
(See note 3)
Used
S
Used
Display OFF
Used
Display OFF
Not used
(See note 3)
Used
(No border )
Display OFF
(See note 2)
30016
to
3FF16
Not used Display OFF
24
16
20
32
Notes 1: Part of 24 ! 32 font is displayed.
2: In OSDL disable mode, character
codes “28016” to “2FF16” are used
in OSDS/P mode (no border).
3: As setting this make output of
font data indeterminate, do not use.
However, “3FE16” and “3FF16” can
be used as character codes of
blank font output in OSDP mode.
Figure 2.16.22 Conditions for each OSDL enable/disable mode
196
Rev. 1.0