PIC18F2585_07 Datasheet, PDF (225/482 Pages) Microchip Technology – Enhanced Flash Microcontrollers with ECAN Technology, 10-Bit A/D and nanoWatt Technology

PIC18F2585/2680/4585/4680
FIGURE 17-27:
BUS COLLISION DURING START CONDITION (SCL = 0)
SDA = 0, SCL = 1
SDA
TBRG
TBRG
SCL
SEN
BCLIF
Set SEN, enable Start
sequence if SDA = 1, SCL = 1
SCL = 0 before BRG time-out,
bus collision occurs. Set BCLIF.
S
‘0’
SSPIF ^{‘0’}
SCL = 0 before SDA = 0,
bus collision occurs. Set BCLIF.
Interrupt cleared
in software
‘0’
‘0’
FIGURE 17-28: BRG RESET DUE TO SDA ARBITRATION DURING START CONDITION
SDA
SDA = 0, SCL = 1
Set S
Less than TBRG
TBRG
SDA pulled low by other master.
Reset BRG and assert SDA.
Set SSPIF
SCL
SEN
BCLIF
S
SCL pulled low after BRG
time-out
Set SEN, enable START
sequence if SDA = 1, SCL = 1
‘0’
S
SSPIF
SDA = 0, SCL = 1,
set SSPIF
Interrupts cleared
in software
© 2007 Microchip Technology Inc.
Preliminary
DS39625C-page 223