PIC18F2585_07 Datasheet, PDF (14/482 Pages) Microchip Technology – Enhanced Flash Microcontrollers with ECAN Technology, 10-Bit A/D and nanoWatt Technology

PIC18F2585/2680/4585/4680
TABLE 1-2: PIC18F2585/2680 PINOUT I/O DESCRIPTIONS
Pin Name
Pin
Number
PDIP,
SOIC
Pin
Type
Buffer
Type
Description
MCLR/VPP/RE3
MCLR
VPP
RE3
1
Master Clear (input) or programming voltage (input).
I
ST
Master Clear (Reset) input. This pin is an active-low
Reset to the device.
P
Programming voltage input.
I
ST
Digital input.
OSC1/CLKI/RA7
OSC1
CLKI
RA7
9
Oscillator crystal or external clock input.
I
ST
Oscillator crystal input or external clock source input.
ST buffer when configured in RC mode; CMOS otherwise.
I CMOS External clock source input. Always associated with pin
function OSC1. (See related OSC1/CLKI, OSC2/CLKO pins.)
I/O TTL
General purpose I/O pin.
OSC2/CLKO/RA6
OSC2
CLKO
RA6
10
Oscillator crystal or clock output.
O
—
Oscillator crystal output. Connects to crystal or resonator in
Crystal Oscillator mode.
O
—
In RC mode, OSC2 pin outputs CLKO which has 1/4 the
frequency of OSC1 and denotes the instruction cycle rate.
I/O TTL
General purpose I/O pin.
Legend: TTL = TTL compatible input
ST = Schmitt Trigger input with CMOS levels
O = Output
CMOS = CMOS compatible input or output
I
= Input
P
= Power
DS39625C-page 12
Preliminary
© 2007 Microchip Technology Inc.