243658-020 Datasheet, PDF (32/128 Pages) Intel Corporation – Intel Celeron Processor up to 1.10 GHz

Intel^® Celeron^® Processor up to 1.10 GHz
Table 7. Non-AGTL+ Signal Group DC Specifications
Symbol
Parameter
Min
Max
V_IL
Input Low Voltage
–0.3
0.7
V_IH
Input High Voltage
1.7
2.625
V_IL1.5
V_IL2.5
V_IH1.5
V_IH2.5
V_OL
Input Low Voltage
Input Low Voltage
Input High Voltage
Input High Voltage
Output Low Voltage
Output High Voltage
–0.150
-0.58
VREF + 0.200
2.0
VREF - 0.200
0.700
VTT
3.18
0.4
V_OH
• S.E.P.P and PPGA
N/A
• FC-PGA/FC-PGA2
Output Low Current
I_OL
• S.E.P.P and PPGA
14
• FC-PGA/FC-PGA2
9
I_L
Leakage Current for
Inputs, Outputs, and I/O
2.625
VTT
±100
Unit
Notes
V
10
V
2.5 V +5% maximum,
Note 10
V
8, 9
V
7, 9
V
5, 8, 9
V
7, 9
V
2
V
All outputs are open-
drain to 2.5 V +5%
V
6, 8, 9
mA
mA 9
µA
3, 4, 5, 6
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all Celeron processor frequencies.
2. Parameter measured at 14 mA (for use with TTL inputs) for S.E.P Package and PPGA Package. It is 9 mA
for FC-PGA/FC-PGA2 packages.
3. (0 ≤ VIN ≤ 2.5 V +5%) for PPGA package and S.E.P package only.
4. (0 ≤ VOUT ≤ 2.5 V +5%) for PPGA package and S.E.P package only.
5. (0≤ VIN ≤ 1.5V +3%) for FC-PGA/FC-PGA2 packages only.
6. (0≤ VOUT ≤ 1.5V +3%) for FC-PGA/FC-PGA2 packages only.
7. Applies to non-AGTL+ signals BCLK, PICCLK, and PWRGOOD for FC-PGA/FC-PGA2 Packages only.
8. Applies to non-AGTL+ signals except BCLK, PICCLK, and PWRGOOD for FC-PGA/FC-PGA2 packages
only.
9. These values are specified at the processor pins for FC-PGA/FC-PGA2 packages only.
10.S.E.P. package and PPGA package only.
32
Datasheet