243658-020 Datasheet, PDF (31/128 Pages) Intel Corporation – Intel Celeron Processor up to 1.10 GHz

Intel^® Celeron^® Processor up to 1.10 GHz
Table 6. AGTL+ Signal Groups DC Specifications
Symbol
Parameter
Min
Max
Unit
Notes
Input Low Voltage
V_IL
• S.E.P.P and PPGA
–0.3
0.82
V
• FC-PGA/FC-PGA2
–0.150
VREF – 0.200
V
9
Input High Voltage
V_IH
• S.E.P.P and PPGA
1.22
VTT
V
2, 3
• FC-PGA/FC-PGA2
VREF + 0.200
VTT
V
2, 3
R_ON
Buffer On Resistance
I_L
Leakage Current for
inputs, outputs, and I/O
16.67
±100
Ω
8
µA
6, 7
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all Celeron processor frequencies and cache
sizes.
2. V_IH and V_OH for the Intel Celeron processor may experience excursions of up to 200 mV above VTT for a
single system bus clock. However, input signal drivers must comply with the signal quality specifications in
Section 3.0.
3. Minimum and maximum VTT are given in Table 8.
4. Parameter correlated to measurement into a 25 Ω resistor terminated to 1.5 V.
5. I_OH for the Intel Celeron processor may experience excursions of up to 12 mA for a single system bus clock.
6. (0 ≤ VIN ≤ 2.0 V +5%) for S.E.P Package and PPGA Package; (0 ≤ VIN ≤ 1.5V +3%) for FC-PGA/FC-PGA2
packages.
7. (0 ≤ VOUT ≤ 2.0 V +5%) for S.E.P Package and PPGA Package; (0 ≤ VOUT ≤ 1.5V +3%) for FC-PGA/
FC-PGA2 packages.
8. Refer to the I/O Buffer Models for IV characteristics.
9. Steady state input voltage must not be above V_SS + 1.65 V or below VTT - 1.65 V.
Datasheet
31