MB86967 Datasheet, PDF (87/129 Pages) Fujitsu Component Limited. – LAN Controller with PC Card, ISA Bus, and General-purpose Bus Interfaces

MB86967
s ELECTRICAL CHARACTERISTICS
1. DC Characteristics
(VDD = +5 V ± 5%, GND = 0 V, Ta = 0°C to +70°C)
Parameter
Symbol
Conditions
Value
Unit
Min. Typ. Max.
IDD Operation state*¹
—
70
100 mA
Power supply current
IDDP Power down*²
—
10
15
mA
IDDS Shut down*³
—
0.1
0.5 mA
TTL “H” level output voltage
VOH IOH = –2 mA, –4 mA, –8 mA
4.0
—
VDD
V
TTL “L” level output voltage
IOL = 3.2 mA, 12 mA
VOL
IOL = 24 mA
VSS
—
0.4
V
VSS
—
0.5
V
TTL “H” level input voltage
TTL standard cell
VIH
TTL schmitt trigger cell
2.2
—
VDD
V
2.4
—
VDD
V
TTL “L” level input voltage
TTL standard cell
VIL
TTL schmitt trigger cell
VSS
—
0.8
V
VSS
—
0.6
V
TTL input leak current
TTL HI-Z leak current*⁴
ILI
VI = 0 to VDD
ILZ
–10
—
10
µA
–10
—
10
µA
Input pull-up/pull-down resistor
RPUPD VI = 0 V to VDD
100
—
—
kΩ
*1: For TP in operation.
*2: With the use of register settings, enable power saving mode, including RESET=Low, TP input/input with
pull-up resistor = OPEN, other input terminal = Low or High, All output terminals = OPEN
*3: With the use of register settings, enable shut-down mode, including RESET=Low, TP input/input with pull-up
resistor = OPEN, other input terminal = Low or High, All output terminals = OPEN
*4: Leak current when the TTL I/O terminal is in a high-impedance state.
87