MB86967 Datasheet, PDF (86/129 Pages) Fujitsu Component Limited. – LAN Controller with PC Card, ISA Bus, and General-purpose Bus Interfaces

MB86967
s ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Power supply voltage
VDD
Input voltage
VI
Output voltage
VO
Storage temperature
Tstg
Operating temperature
Top
Output current
IO
* : Duration of voltage applied is within 1 sec per terminal.
Rating
Min.
Max.
VSS – 0.5
+6.0
VSS – 0.5
VDD + 0.5
VSS – 0.5
VDD + 0.5
–55
+125
–40
+85
–40
+40
(GND = 0 V)
Unit
V
V
V
°C
°C
mA
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Min.
Value
Typ.
Max.
Power supply voltage
VDD
4.75
5.00
5.25
Operating temperature
Ta
0
—
+70
—
–2.0
—
TTL “H” level output current
IOH
—
–4.0*¹
—
—
–8.0*³
—
—
3.2
—
TTL “L” level output current
IOL
—
12.0*²
—
—
24.0*³
—
Crystal oscillator frequency
fXtal
20.000 ± 0.005%
*1: Applies to P92 (IREQ, IREQ0, INT)
*2: Applies to LED terminal (open-drain output) and P92 (IREQ, IREQ0, INT)
*3: Applies to P3 (WAIT, IOCHRDY, READY) and P84 (IOIS16)
Unit
V
°C
mA
mA
mA
mA
mA
mA
MHz
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device's electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
86