PXS30 Datasheet, PDF (78/139 Pages) Freescale Semiconductor, Inc – PXS30 Microcontroller

Electrical characteristics
3.9 Supply current characteristics
Table 19. Current consumption characteristics¹
No.
Symbol
Parameter
Conditions
Min Typ Max Unit
1
I_{DD_LV}
CC Maximum run I_DD
V_{DD_LV} = 1.36 V, f_Core = 180 MHz, 1:2
— 600 900 mA
(incl. digital core logic Mode, DPM, both cores executing EMC test
and analog block of code, internal VREG mode, all caches
the LV rail)
enabled, code execution of core 0 from
code flash 0, code execution of core 1 from
code flash 1, FMPLL_1 active at 120 MHz.
2 I_{DD_LV_PLL} CC Maximum run I_DD for V_{DD_LV_PLL} = 1.36 V, f_VCO running at
each PLL²
maximum frequency.
— 1.5 2 mA
3 I_{DD_HV_FLA} CC Maximum run I_DD
Flash
V_{DD_HV_FLA} = 3.6 V, DPM, both cores
— 20 30 mA
executing EMC test code, code execution of
core 0 from code flash 0, code execution of
core 1 from code flash 1.
4 I_{DD_HV_OSC} CC Maximum run I_DD
OSC
f_OSC 4 MHz to 40 MHz,
V_{DD_HV_OSC} 3.6 V
5 I_{DD_HV_ADV} CC Maximum run I_DD for V_{DD_HV_ADV} = 3.6 V
each ADC³
6 I_{DD_HV_ADR024} CC Maximum reference ADC0 powered on⁶
I_DD⁵
ADC2 powered on
7 I_{DD_HV_ADR134} CC Maximum reference ADC1 powered on
I_DD⁵
ADC3 powered on
8 I_{DD_HV_ADR07} CC Maximum reference
I_DD
9 I_{DD_HV_ADR17} CC Maximum reference
I_DD
10 I_{DD_HV_ADR237} CC Maximum reference
I_DD⁵
ADC0 powered on⁶
ADC1 powered on
ADC2 powered on
ADC3 powered on
— 1 3 mA
— 2 4 mA
— — 2 mA
— — 1.2 mA
— — 1.2 mA
— — 1.2 mA
— — 2 mA
— — 1.2 mA
— — 1.2 mA
— — 1.2 mA
NOTES:
1 _{Applies to TJ = –40 °C to 150 °C.}
2 _{Total current on IDD_LV_PLL needs to be multiplied with the number of active PLLs.}
3 _{Total current on IDD_HV_ADV needs to be multiplied with the number of active ADCs.}
4 _{257 MAPBGA only.}
5 _{Total current on IDD_HV_ADRxx is the sum of both references if both ADCs are powered on.}
6 _{ADC0 includes 0.7 mA dissipation for the temperature sensor (TSENS).}
7 _{473 MAPBGA only.}
3.10 Temperature sensor electrical characteristics
Table 20. Temperature sensor electrical characteristics
Symbol
1
—
P Accuracy
Parameter
Conditions
T_J = –40 °C to T_A = 125 °C
Min Max Unit
–10 10
°C
PXS30 Microcontroller Data Sheet, Rev. 1
78
Preliminary—Subject to Change Without Notice
Freescale Semiconductor