|
MC68HC705P9 Datasheet, PDF (78/160 Pages) Motorola, Inc – HCMOS Microcontroller Unit | |||
|
◁ |
Freescale Semiconductor, Inc.
Low Power Modes
6.3 Wait Mode
The WAIT instruction puts the MCU in an intermediate power-
consumption mode and has the following effects on the MCU:
⢠Clears the I bit in the condition code register, enabling interrupts
⢠Stops the CPU clock, but allows the internal clock to drive the
capture/compare timer, the COP watchdog, and the ADC
The WAIT instruction does not affect any other registers or any I/O lines.
The following conditions restart the CPU clock and bring the MCU out of
wait mode:
⢠External interrupt â A high-to-low transition on the IRQ/VPP pin
loads the program counter with the contents of locations $1FFA
and $1FFB.
⢠Timer interrupt â Input capture, output compare, and timer
overflow interrupt requests load the program counter with the
contents of locations $1FF8 and $1FF9.
⢠COP watchdog reset â A timeout of the COP watchdog resets the
MCU and loads the program counter with the contents of locations
$1FFE and $1FFF. Software can enable timer interrupts so that
the MCU can periodically exit wait mode to reset the COP
watchdog.
⢠External reset â A logic zero on the RESET pin resets the MCU
and loads the program counter with the contents of locations
$1FFE and $1FFF.
Technical Data
78
Low Power Modes
For More Information On This Product,
Go to: www.freescale.com
MC68HC705P9 â Rev. 4.0
MOTOROLA
|
▷ |