English
Language : 

MC9S08JM16 Datasheet, PDF (369/386 Pages) Freescale Semiconductor, Inc – Microcontrollers
Appendix A Electrical Characteristics
A.13 Flash Specifications
This section provides details about program/erase times and program-erase endurance for the flash
memory.
Program and erase operations do not require any special power sources other than the normal VDD supply.
For more detailed information about program/erase operations.
Table A-15. Flash Characteristics
Num C
Characteristic
Symbol
Min
Typical1 Max
Unit
1
Supply voltage for program/erase
Vprog/erase
2.7
5.5
V
2
Supply voltage for read operation
3
Internal FCLK frequency2
VRead
2.7
fFCLK
150
5.5
V
200
kHz
4
Internal FCLK period (1/FCLK)
5
Byte program time (random location)(2)
6
Byte program time (burst mode)(2)
7
Page erase time3
8
Mass erase time2
9
C Program/erase endurance4
TL to TH = –40°C to + 85°C
T = 25°C
tFcyc
tprog
tBurst
tPage
tMass
5
6.67
μs
9
4
4000
20,000
tFcyc
tFcyc
tFcyc
tFcyc
10,000
—
—
—
100,000 —
cycles
10
Data retention5
tD_ret
15
100
—
years
1 Typical values are based on characterization data at VDD = 5.0 V, 25°C unless otherwise stated.
2 The frequency of this clock is controlled by a software setting.
3 These values are hardware state machine controlled. User code does not need to count cycles. This information
supplied for calculating approximate time to program and erase.
4 Typical endurance for Flash is based on the intrinsic bitcell performance. For additional information on how
Freescale Semiconductor defines typical endurance, please refer to Engineering Bulletin EB619/D, Typical
Endurance for Nonvolatile Memory.
5 Typical data retention values are based on intrinsic capability of the technology measured at high temperature and
de-rated to 25 °C using the Arrhenius equation. For additional information on how Freescale Semiconductor defines
typical data retention, please refer to Engineering Bulletin EB618/D, Typical Data Retention for Nonvolatile Memory.
A.14 USB Electricals
The USB electricals for the S08USBV1 module conform to the standards documented by the Universal
Serial Bus Implementers Forum. For the most up-to-date standards, visit http://www.usb.org.
MC9S08JM16 Series Data Sheet, Rev. 2
Freescale Semiconductor
369