 English |
|
|
|
|
|
|
|
| 1GB-DDR3L-AS4C64M16D3L Datasheet, PDF (22/90 Pages) Alliance Semiconductor Corporation – JEDEC Standard Compliant | |||
| |||
| ◁ |
1Gb DDR3L â AS4C64M16D3L
Table 13. Single-Ended AC and DC Input Levels for Command and Address
Symbol
Parameter
-12
Min.
Max.
Unit Note
VIH.CA(DC90) DC input logic high
VREF+0.09
VDD
V 1,5
VIL.CA(DC90) DC input logic low
VSS
VREF-0.09
V 1,6
VIH.CA(AC160) AC input logic high
VREF+0.160
-
V 1,2
VIL.CA(AC160) AC input logic low
-
VREF-0.160
V 1,2
VIH.CA(AC135) AC input logic high
VREF+0.135
-
V 1,2
VIL.CA(AC135) AC input logic low
-
VREF-0.135
V 1,2
VRefCA(DC)
Reference Voltage for ADD, CMD inputs 0.49xVDD
0.51xVDD
V 3,4
NOTE 1: For input only pins except RESET#. Vref = VrefCA(DC).
NOTE 2: See âOvershoot and Undershoot Specificationsâ.
NOTE 3: The ac peak noise on VRef may not allow VRef to deviate from VRefCA(DC) by more than +/-1% VDD.
NOTE 4: For reference: approx. VDD/2 +/- 13.5 mV.
NOTE 5: VIH(dc) is used as a simplified symbol for VIH.CA(DC90)
NOTE 6: VIL(dc) is used as a simplified symbol for VIL.CA(DC90)
NOTE 7: VIH(ac) is used as a simplified symbol for VIH.CA(AC160), VIH.CA(AC135) and VIH.CA(AC160) value is used
when Vref + 0.160V is referenced, VIH.CA(AC135) value is used when Vref + 0.135V is referenced.
NOTE 8: VIL(ac) is used as a simplified symbol for VIL.CA(AC160), VIL.CA(AC135) and VIL.CA(AC160) value is used when
Vref - 0.160V is referenced, VIL.CA(AC135) value is used when Vref - 0.135V is referenced.
Table 14. Single-Ended AC and DC Input Levels for DQ and DM
Symbol
Parameter
-12
Min.
Max.
Unit Note
VIH.DQ(DC90) DC input logic high
VREF+0.09
VDD
V 1,5
VIL.DQ(DC90) DC input logic low
VSS
VREF-0.09
V 1,6
VIH.DQ(AC135) AC input logic high
VREF+0.135
-
V 1,2
VIL.DQ(AC135) AC input logic low
-
VREF-0.135
V 1,2
VRefDQ(DC) Reference Voltage for DQ, DM inputs
0.49xVDD
0.51xVDD
V 3,4
NOTE 1: Vref = VrefDQ(DC).
NOTE 2: See âOvershoot and Undershoot Specificationsâ.
NOTE 3: The ac peak noise on VRef may not allow VRef to deviate from VRefDQ(DC) by more than +/-1% VDD.
NOTE 4: For reference: approx. VDD/2 +/- 13.5 mV.
NOTE 5: VIH(dc) is used as a simplified symbol for VIH.DQ(DC90)
NOTE 6: VIL(dc) is used as a simplified symbol for VIL.DQ(DC90)
NOTE 7: VIH(ac) is used as a simplified symbol for VIH.DQ(AC135) and VIH.DQ(AC135) value is used when Vref + 0.135V
is referenced.
NOTE 8: VIL(ac) is used as a simplified symbol for VIL.DQ(AC135) and VIL.DQ(AC135) value is used when Vref - 0.135V is
referenced.
Confidential
22
Rev. 2.0
Aug. /2014
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese