DS824 Datasheet, PDF (7/55 Pages) Xilinx, Inc – LogiCORE IP AXI Bus Functional Models (v3.00.a)

LogiCORE IP AXI Bus Functional Models (v3.00.a)
Table 2: AXI3 Slave BFM Parameters (Cont’d)
BFM Parameters
Description
CHANNEL_LEVEL_INFO
This configuration variable controls the printing of channel level information
messages. When set to 1 info messages are printed; when set to zero no channel
level information is printed.
The default (0) disables the channel level info messages.
FUNCTION_LEVEL_INFO
This configuration variable controls the printing of function level information
messages. When set to 1 info messages are printed; when set to zero no function
level information is printed.
The default (1) enables the function level info messages.
AXI4 BFMs
The AXI4 BFMs modules and files are named as follows:
• Full Master BFM
• Module Name: cdn_axi4_master_bfm
• File Name: cdn_axi4_master_bfm.v
• Full Slave BFM
• Module Name: cdn_axi4_slave_bfm
• File Name: cdn_axi4_slave_bfm.v
• Lite Master BFM
• Module Name: cdn_axi4_lite_master_bfm
• File Name: cdn_axi4_lite_master_bfm.v
• Lite Slave BFM
• Module Name: cdn_axi4_lite_slave_bfm
• File Name: cdn_axi4_lite_slave_bfm.v
• Streaming Master BFM
• Module Name: cdn_axi4_streaming_master_bfm
• File Name: cdn_axi4_streaming_master_bfm.v
• Streaming Slave BFM
• Module Name: cdn_axi4_streaming_slave_bfm
• File Name: cdn_axi4_streaming_slave_bfm.v
AXI4 Master BFM
Table 3 contains a list of parameters and configuration variables supported by the AXI4 Master BFM.
Table 3: AXI4 Master BFM Parameters
BFM Parameters
Description
NAME
String name for the master BFM. This is used in the messages coming from the
BFMs. The default for the master BFM is “MASTER_0.”
DATA_BUS_WIDTH
Read and write data buses can be 8, 16, 32, 64, 128, 256, 512, or 1,024 bits wide.
Default is 32.
ADDRESS_BUS_WIDTH
Default is 32.
ID_BUS_WIDTH
Default is 4.
DS824 July 25, 2012
www.xilinx.com
7
Product Specification