DS692 Datasheet, PDF (2/41 Pages) Xilinx, Inc – Radiation-Hardened

Radiation-Hardened, Space-Grade Virtex-5QV FPGA Data Sheet: DC and AC Switching Characteristics
Table 2: Recommended Operating Conditions
Symbol
Description
V_CCINT
V_CCAUX
V_CCO
V_IN
Internal supply voltage relative to GND
Auxiliary supply voltage relative to GND
Supply voltage relative to GND
3.3V supply voltage relative to GND
2.5V and below supply voltage relative to GND
I_IN(1)
Maximum current through any pin in a powered or unpowered bank when
forward biasing the clamp diode.
V_BATT
T_j
Battery voltage relative to GND
Operating junction temperature
Notes:
1. A total of 100 mA per bank should not be exceeded.
Min
0.95
2.375
1.14
GND – 0.20
GND – 0.20
Max
1.05
2.625
3.45
3.45
V_CCO + 0.2
–
10
1.0
3.6
–55
+125
Units
V
V
V
V
V
mA
V
°C
Table 3: DC Characteristics Over Recommended Operating Conditions
Symbol
V_DRINT
V_DRI
I_REF
I_L
C_IN
I_RPU
I_RPD
I_BATT(2)
n
r
Description
Data retention V_CCINT voltage (below which configuration data might be lost)
Data retention V_CCAUX voltage (below which configuration data might be lost)
V_REF leakage current per pin
Input or output leakage current per pin (sample-tested)
Input capacitance (sample-tested)
Pad pull-up (when selected) @ V_IN = 0V, V_CCO = 3.3V
Pad pull-up (when selected) @ V_IN = 0V, V_CCO = 2.5V
Pad pull-down (when selected) @ V_IN = 2.5V
Battery supply current
Temperature diode ideality factor
Series resistance
Notes:
1. Typical values are specified at nominal voltage, 25°C.
2. Maximum value specified for worst-case process at 25°C.
Min Typ⁽¹⁾ Max Units
0.75 –
–
V
2.0
–
–
V
–
–
20 µA
–
–
20 µA
–
–
8
pF
20
– 150 µA
10
–
90 µA
5
– 110 µA
–
– 150 nA
– 1.0002 –
n
–
5.0
–
Ω
Important Note
Typical values for quiescent supply current are now specified at nominal voltage, 125°C junction temperatures (T_j). Xilinx
recommends analyzing static power consumption at T_j = 125°C because the majority of designs operate near the high end
of the temperature range. Data sheets for older products (e.g., Virtex-4QV devices) still specify typical quiescent supply
current at T_j = 25°C. Use the Xilinx Power Estimator (XPE) spreadsheet tool (download at http://www.xilinx.com/power) to
calculate static power consumption for conditions other than those specified in Table 4.
Table 4: Typical Quiescent Supply Current
Symbol
I_CCINTQ
I_CCOQ
I_CCAUXQ
Description
Quiescent V_CCINT supply current
Quiescent V_CCO supply current
Quiescent V_CCAUX supply current
Device
XQR5VFX130
XQR5VFX130
XQR5VFX130
Typical^(1)(2)(3)
6344⁽⁴⁾
12
304
Units
mA
mA
mA
Notes:
1. Typical values are specified at nominal voltage, 125°C junction temperatures (T_j).
2. Typical values are for blank configured devices with no output current loads, no active input pull-up resistors, all I/O pins are 3-stated and floating.
3. If DCI or differential signaling is used, more accurate quiescent current estimates can be obtained by using the Xilinx Power tool.
4. Maximum I_CCINTQ is 8A, specified at maximum V_CCINT and 125°C junction temperature (T_j).
DS692 (v1.3.1) January 16, 2015
Product Specification
www.xilinx.com
Send Feedback
2